About this product
Range : 2-4cm
Potentiometer for maximum range setting
Can be used to differentiate between black and white (Can be used for line sensing)
Onboard LED indication for detection
Works on 5V input
TTL compatible output
LM358 IC (Integrated Circuit) that acts as a comparator/ ADC (Analog to Digital Converter) IC which makes it a digital sensor.
Description:
This is a multipurpose infrared sensor that can be used for obstacle sensing, line sensing, etc. and also as an encoder sensor. The sensor provides a digital output (1 or 0). The sensor outputs a logic one (+3.5V). At the digital output when an object is placed in front of the sensor and logic zero (0V) when there is no object in front of the sensor. An onboard LED is used to indicate the presence of an object.
Specification:
Operating Voltage: 3.3~5V
Ports: VCC / GND / OUT
Features:
Potentiometer for maximum range setting
Can be used to differentiate between black and white (Can be used for line sensing)
Onboard LED indication for detection
Works on 5V input
TTL compatible output
LM358 IC (Integrated Circuit) that acts as a comparator/ ADC (Analog to Digital Converter) IC which makes it a digital sensor.
Pin Description:
Pin
Name
Description
1
GND
Ground (It grounds the Input and completes the circuit path)
2
VCC
3.3V to 5V (Recommended Voltage)
3
OUT
Output Pin that goes low when Obstacle is in range
4
Power LED
Illuminates when power is Applied
5
Obstacle LED
Illuminates when the obstacle is detected
6
Distance Adjust
Adjust detection Distance.
7
IR Emitter
Infrared Emitter LED
8
IR Receiver
The infrared receiver that receives the signal transmitted by Infrared Emitter
Package Included:
1 x IR Sensor Module
Potentiometer for maximum range setting
Can be used to differentiate between black and white (Can be used for line sensing)
Onboard LED indication for detection
Works on 5V input
TTL compatible output
LM358 IC (Integrated Circuit) that acts as a comparator/ ADC (Analog to Digital Converter) IC which makes it a digital sensor.