About this product
Welcome to Our Channel REES52 In this video, we are introducing our new kit "IoT Revolution kit - ELGYEM". Complete description for all the components available in this video (Link - https://www.youtube.com/watch?v=Nm2Fsi7lLsg). You can learn how to use all the kit components with a diagram.
PACKAGE INCLUDED
Product name
Qty
NodeMCU ESP8266-12e Wi-fi V1 board
1
B-10 Buzzer
1
DHT11 Module
1
Resistor ( 100R - 5 )
Breadboard 830 pt
1
Arduino Due Cable
1
LDR Module
1
Jumper wire (Male to Male) - 40 pcs
1
Jumper Wire (male to female)- 20 pcs
1
Tilt Switch
1
Led (each colour)
10
Water Level Sensor
1
Ultrasonic Sensor
1
PROJECT LIST
S.No.
Project Name
1
Make a Led Chaser Circuit using LEDs with NodeMCU ESP8266-12E Wi-Fi Board
2
Make an IoT based Gas level controlling system using the MQ-2 Gas Sensor module and led with NodeMCU ESP8266-12e Board
3
Make an IoT based Tilt Switch Alarm using Tilt switch and Buzzer with NodeMCU ESP8266-12e Wi-Fi Board
4
Make an IoT Based Soil Moisture Monitoring System using Soil Moisture Sensor with ESP8266-12e Board
5
Make an IoT based Temperature level indicator using Leds and DHT11 Module with ESP8266-12e Wi-Fi board
6
Make an IoT based Led Control System using MQTT Box Web Application using Led and ESP8266-12e Wi-Fi board
7
Make an IoT LDR Alarm circuit using LDR module and NodeMCU ESP8266-12E Wi-Fi Module
8
Make a Gas Level Monitoring System using MQ-2 Gas Sensor Module with NodeMCU ESP8266-12E Board
9
Measure Temperature and Humidity using DHT11 & ESP8266-12E using Blynk IOT application
10
Turn On/Off led via web Server using NodeMCU ESP8266-12E Board
SOFTWARE REQUIRED
Arduino IDE 1.8.10 (programmable platform for Arduino)
Click To Download: https://www.arduino.cc/en/Main/Software
PRODUCT DESCRIPTION
LED
NodeMCU ESP8266 CP2102 NodeMCU WIFI Serial Wireless Module
ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module
Built-in Micro-USB, with flash and reset switches, easy to program
Full I/O port and Wireless 802.11 supported, direct download no need to reset
Arduino compatible works great with the latest Arduino IDE/Mongoose IoT/Micro python
Operating Voltage: 2.5V to 3.6V
On-board 3.3V 600mA regulator
80mA Operating Current
20 µA during Sleep Mode
WARNING
The ESP8266 requires a 3.3V power supply and 3.3V logic levels for communication. The GPIO pins are not 5V-tolerant! If you want to interface the board with 5V (or higher) components, you’ll need to do some level shifting.
DHT11 Module
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±1°C and ±1%
1
Vcc
Power supply 3.5V to 5.5V
2
Data
Outputs both Temperature and Humidity through serial Data
3
Ground
Connected to the ground of the circuit
Tilt Switch Sensor
A Tilt Sensor switch is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a mercury ball inside it that moves and makes the circuit. So the tilt sensor can turn on or off the circuit based on the orientation.
The tilt sensor is cylindrical and contains a free conductive rolling ball inside with two conductive elements (poles) beneath.
Here’s how it works:
When the sensor is completely upright, the ball falls to the bottom of the sensor and connects the poles, allowing the current to flow.
When the sensor is tilted, the ball doesn’t touch the poles, the circuit is open, and the current doesn’t flow.
MQ-2 GAS SENSOR MODULE
Pin No:
Pin Name:
Description
1
Vcc
This pin powers the module, typically the operating voltage is +5V
2
Ground
Used to connect the module to system ground
3
Digital Out
You can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer
4
Analog Out
This pin outputs 0-5V analog voltage based on the intensity of the gas
Operating Voltage is +5V
can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Preheat duration 20 seconds
Can be used as a Digital or analog sensor
The Sensitivity of Digital pin can be varied using the potentiometer
SOIL MOISTURE SENSOR MODULE
The specifications of the soil moisture sensor FC-28 are as follows
Input Voltage
3.3 – 5V
Output Voltage
0 – 4.2V
Input Current
35mA
Output Signal
Both Analog and Digital
The soil Moisture sensor FC-28 has four pins
VCC: For power
A0: Analog output
D0: Digital output
GND: Ground
The Module also contains a potentiometer that will set the threshold value and then this threshold value will be compared by the LM393 comparator. The output LED will light up and down according to this threshold value.
LDR MODULE
The Light Dependent Resistor (LDR) is just another special type of Resistor and hence has no polarity
Operating Voltage: 3.3V to 5V DC
Operating Current: 15ma
output Digital - 0V to 5V, Adjustable trigger level from preset
Output Analog - 0V to 5V based on light falling on the LDR
Pin details
VCC = 3.3V to 5V DC
GND = Ground
S = Output
BUZZER
APPLICATION REQUIRED
BLYNK
Download from Google play store and Apple Store
MQTT BOX
URL - http://workswithweb.com/mqttbox.html
THINGSPEAK
URL- https://thingspeak.com/