INSLOGIC

INSLOGIC PLA Pro 3D Printer Filament 1.75mm 1kg Spool - Grey

SKU IR0000258

INSLOGIC PLA Pro is a modified polylactic acid filament for FDM 3D printers using 1.75mm material. This listing is for one 1kg spool in Grey.

₹1651.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

INSLOGIC PLA Pro Grey Filament, 1.75mm, 1kg

INSLOGIC PLA Pro is a modified polylactic acid filament for FDM 3D printers using 1.75mm material. This listing is for one 1kg spool in Grey. It is PLA Pro, not PETG Pro, PETG-CF or an unspooled refill. The neutral grey colour suits prototypes, display models, housings and everyday project parts where a restrained finish helps surface details remain visible.

Designed for straightforward FDM printing

The manufacturer positions PLA Pro as an easy-to-print material with improved toughness and layer bonding compared with conventional PLA. Its low tendency to warp makes it useful for detailed shapes and longer prints, while the controlled filament diameter helps the extruder feed a consistent amount of material. Keep the filament path clear and check the first layer before leaving a print to run.

PLA Pro can be used for educational models, decorative objects, fit checks and functional prototypes. Choose orientation, wall count and infill for the job, then test the finished part under its actual conditions. This is not a promise that any printed shape will carry a particular load. Manufacturer family photographs show example prints and equipment; the aircraft, controller, printer and other finished objects are not included. Only the Grey filament spool is supplied.

Starting settings and storage

INSLOGIC gives a nozzle range of 195-205°C for printing at 50-100mm/s, and 205-220°C for 100-300mm/s. The upper speed depends on the printer's flow capacity, geometry and chosen layer height. A 300mm/s setting is a supported tuning target, not a guaranteed result on every printer. The manufacturer lists a 50-60°C bed, 100% cooling fan, and textured PEI or cool-plate surfaces as starting references.

Use an appropriate PLA profile and adjust temperature, cooling, retraction and first-layer settings for your own machine. For moisture care, the manufacturer's drying reference is 50°C for four hours. Keep unused material dry, cool and away from direct sunlight. INSLOGIC states compatibility with suitable Bambu Lab AMS and A1 mini setups. Confirm that the spool and filament path suit your particular printer arrangement.

Specifications

Brand / material INSLOGIC PLA Pro

Colour Grey

Filament diameter 1.75mm ±0.02mm

Net filament weight / nominal length 1kg / 320m

Nozzle temperature 195-220°C, adjusted to speed

Bed temperature 50-60°C

Drying reference 50°C for 4 hours

Tensile strength 56MPa

Elongation at break 20.3%

Flexural strength / modulus 85.8MPa / 2795MPa

Notched Izod impact strength 20.1kJ/m²

Hardness / density 83 Shore D / 1.20g/cm³

Heat deflection temperature 55°C at 0.45MPa

Package contents 1 x 1kg Grey PLA Pro filament spool

Use notes

These mechanical and thermal figures are manufacturer laboratory references. Printed properties vary with geometry, orientation, settings and temperature. The heat-deflection value is not a continuous service-temperature approval. Test any part exposed to heat or sustained force. Work in a ventilated printing area and avoid contact with the hot nozzle and bed.

Specifications

Brand / material
INSLOGIC PLA Pro
Colour
Grey
Filament diameter
1.75mm ±0.02mm
Net filament weight / nominal length
1kg / 320m
Nozzle temperature
195-220°C, adjusted to speed
Bed temperature
50-60°C
Drying reference
50°C for 4 hours
Tensile strength
56MPa
Elongation at break
20.3%
Flexural strength / modulus
85.8MPa / 2795MPa
Notched Izod impact strength
20.1kJ/m²
Hardness / density
83 Shore D / 1.20g/cm³
Heat deflection temperature
55°C at 0.45MPa
Package contents
1 x 1kg Grey PLA Pro filament spool

More in Filament

You might also need