INSLOGIC

INSLOGIC PETG-CF10 Carbon Fiber 3D Printer Filament 1.75mm 1kg Spool - Grey

SKU IR0000253

INSLOGIC PETG-CF10 combines a PETG base with 10% carbon fibre for FDM printing. This listing supplies one 1kg spool in Grey, with a nominal filament diameter of 1.75mm.

₹2160.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

INSLOGIC PETG-CF10 Grey Filament, 1.75mm, 1kg

INSLOGIC PETG-CF10 combines a PETG base with 10% carbon fibre for FDM printing. This listing supplies one 1kg spool in Grey, with a nominal filament diameter of 1.75mm. Choose it when your project calls for the PETG-CF10 formulation rather than unfilled PETG, PETG Pro or PLA-CF. Its muted grey colour and matte surface are useful for practical models where a low-gloss finish is preferred.

For functional prototypes and detailed parts

The carbon fibre reinforcement is intended to improve stiffness while retaining useful toughness. INSLOGIC identifies tools, structural components and functional prototypes as applications for this material. It is a starting point for making brackets, housings, fit-check models and workshop fixtures, provided the finished design is tested for its intended conditions. A material choice alone does not establish the load capacity of a printed part.

The manufacturer describes low warping and good dimensional stability. Actual results still depend on bed preparation, first-layer calibration, part orientation and the printer's extrusion system. The matte finish can make surface reflections less prominent, but it does not remove layer lines or replace good print settings.

Printer setup and material care

Use an FDM printer that accepts 1.75mm filament and can operate at the required temperatures. INSLOGIC's current starting guidance is a 240-250°C nozzle, 50-60°C bed and 50-100mm/s print speed, with 100% cooling fan. These are tuning references, not guaranteed settings for every machine. Begin with a suitable material profile and check extrusion, bonding and surface quality on a small test before committing to a long print.

INSLOGIC states that PETG-CF10 is not compatible with any AMS series. Do not assume compatibility merely because a printer accepts other PETG materials. Check your feed path and printer manufacturer's instructions for reinforced filaments. The drying reference is 50-60°C for four hours. Store unused filament dry and protected from moisture, and use temperature-controlled drying equipment suitable for the spool.

Specifications

Brand / formulation INSLOGIC PETG-CF10, 10% carbon fibre reinforced PETG

Colour Grey (#494D53 manufacturer colour reference)

Diameter 1.75mm ±0.02mm

Net filament weight / nominal length 1kg / 330m

Nozzle / bed temperature 240-250°C / 50-60°C

Starting print speed / fan 50-100mm/s / 100%

Drying reference 50-60°C for 4 hours

Tensile strength / elongation at break 36.7MPa / 35%

Flexural strength / modulus 58MPa / 2835MPa

Heat deflection temperature 73.5°C at 0.45MPa

AMS compatibility Not compatible with any AMS series

Package contents 1 x 1kg Grey PETG-CF10 filament spool

Use notes

Mechanical and thermal figures are manufacturer laboratory references. Printed properties vary with geometry, orientation, settings and temperature. The heat-deflection figure is not a continuous-use temperature rating. Manufacturer application images illustrate the material family; shown printed objects, equipment and accessories are not included and may use another colour. Printed examples are not certification for protective or safety-critical use.

Specifications

Brand / formulation
INSLOGIC PETG-CF10, 10% carbon fibre reinforced PETG
Colour
Grey (#494D53 manufacturer colour reference)
Diameter
1.75mm ±0.02mm
Net filament weight / nominal length
1kg / 330m
Nozzle / bed temperature
240-250°C / 50-60°C
Starting print speed / fan
50-100mm/s / 100%
Drying reference
50-60°C for 4 hours
Tensile strength / elongation at break
36.7MPa / 35%
Flexural strength / modulus
58MPa / 2835MPa
Heat deflection temperature
73.5°C at 0.45MPa
AMS compatibility
Not compatible with any AMS series
Package contents
1 x 1kg Grey PETG-CF10 filament spool

More in Filament

You might also need