About this product
INSLOGIC High Temp Resin, Grey, 1kg
INSLOGIC High Temp Resin is a specialist UV-curing material for prototypes, moulds and engineering models that need better dimensional stability under heat than a general-purpose printing resin. This listing supplies one 1kg bottle in Grey. It is the High Temp formulation, not INSLOGIC Tough or High Detail Resin. Choose it for a project whose thermal requirements have been checked against the manufacturer's test conditions and your own part design.
Heat resistance with defined limits
The manufacturer reports a heat deflection temperature of 170°C at a load of 0.45MPa. It also describes short exposure to temperatures up to 300°C for a maximum of three minutes. These are different claims: the short-duration figure is not a continuous operating temperature, and neither figure guarantees the strength or accuracy of every printed part at that temperature. Validate the finished design before exposing it to heat, pressure or moving machinery.
The material is intended for rigid, dimensionally accurate prints such as mould inserts, fixtures and test components. Low shrinkage can help with detailed geometry, but it does not remove the need for tolerance checks. Grey is useful for examining the shape of a prototype before further finishing. The photographs include examples in Grey and translucent colours from the same High Temp range. Printed parts, moulds, tools and other props are illustrations and are not supplied with the bottle.
Printing and post-processing
Use a compatible LCD, SLA or DLP resin printer operating within the 385-405nm wavelength range. Shake and stir the material before use, select a suitable manufacturer profile, and print a small calibration part for your machine. The manufacturer provides 0.05mm layers and five to ten bottom layers as starting guidance. Exposure and lift settings still need adjustment to the screen, build size, model geometry and room conditions.
Follow the current manufacturer instructions for washing and post-curing, including any preparation needed before thermal testing. Evaluate the cured part rather than relying on how it feels immediately after printing. Material properties can change with print orientation, exposure, temperature and curing history. The figures below are manufacturer laboratory values, not a certification for a finished assembly. This resin is not a substitute for testing or for a material approved for a safety-critical use.
Specifications
Brand / formulation
INSLOGIC High Temp Resin
Colour / net weight
Grey / 1kg
Curing wavelength
385-405nm
Compatible printer types
LCD, SLA and DLP resin printers
Heat deflection temperature
170°C at 0.45MPa
Short exposure claim
Up to 300°C for up to 3 minutes; not a continuous-use rating
Tensile strength
35MPa
Flexural strength
85MPa
Flexural modulus
3850MPa
Liquid density
1.28g/cm³ at 23°C
Viscosity
200-500mPa.s at 25°C
Shore hardness
87D
Package contents
1 x 1kg bottle of Grey High Temp Resin
Handling and storage
Wear nitrile gloves and eye protection, and work in a well-ventilated area. Low odour does not mean safe skin contact. Keep uncured resin away from skin, eyes, children, pets, food and drinks. Store the closed container in a cool, dry place away from heat and sunlight. Do not pour resin or contaminated wash liquid into a drain. Follow the safety data sheet and local disposal requirements. This material is not approved for food, drink or medical use on the human body.