About this product
3.3 and 5 V compatible logic supply
Internal UVLO
Low RDS (ON) output
Thermal shutdown circuitry
Ground fault protection
Description:
A4988 is a complete micro-stepping motor driver with built-in translator for easy operation. The product is available in full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motors of an output drive capability of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can operate in slow or mixed decay modes. Converter is easy to implement key A4988. Just enter a pulse in the step input drives the motor to produce micro-step. Without the need for phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 is ideal for complex microprocessor is unavailable or overloaded applications.
In the micro-step operation, the chopper control A4988 automatically selects within the current decay mode (slow or mixed). In mixed decay mode, the device is initially set to a fixed part of the rapid decay in downtime and slow decay for the remainder of downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry provides to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover current protection. Special power sequencing.
Features:
Model: A4988
Module power supply range: 3.3V ~ 5V
PCB size: 20 x 15mm
Low RDS (ON) outputs
Automatic current decay mode detection / selection
Mixed with slow current decay mode
Synchronous rectification for low power dissipation
Internal UVLO
Crossover current protection
3.3V and 5 V compatible logic supply
Thermal shutdown circuit
Ground short circuit protection
Load short-circuit protection
Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16
Package Included:
1 x A4988 Stepper Motor Driver Module
Model: A4988
Module power supply range: 3.3V ~ 5V
PCB size: 20 x 15mm
Low RDS (ON) outputs
Automatic current decay mode detection / selection
Mixed with slow current decay mode
Synchronous rectification for low power dissipation
Internal UVLO
Crossover current protection
3.3V and 5 V compatible logic supply
Thermal shutdown circuit
Ground short circuit protection
Load short-circuit protection
Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16