About this product
Type: Assembled Tester
Display: 1.8inch 160*128 LCD
Input Voltage: DC 6.8V-12V
Operating Current: about 30mA, measured when inputting 7.5V DC voltage
Description:
This is a multi-functional transistor tester for automatic detection of NPN and PNP transistors, N channel, P channel, MOSFET and JFET, diodes, dual diode, thyristor, and automatic identification of the transistor pinout. It also can be used for frequency measurement and PWM signal generator.
Specifications:
Type: Assembled Tester
Display: 1.8inch 160*128 LCD
Input Voltage: DC 6.8V-12V
Operating Current: about 30mA, measured when inputting 7.5V DC voltage
Resistance Measurement: Max. 50MΩ
Resistance Resolution: 0.01Ω
Capacitance Measurement: 25pF~100mF
Capacitance Resolution: 1pF
Features:
The processor uses a high-performance single-chip ATMEAG328P DIP-28. With IC seat
The display unit uses a 160×128 pixel color display, the whole screen character number is 8×20, the color depth is 16 bits, graphics display component symbol
Rotary code switch control, one-button measurement, automatic shutdown
Powered by a 9V laminated battery, it can also be powered by a power adapter. The current is about 30mA, and the current is about 20nA after the shutdown
Automatic detection of NPN and PNP transistors, FETs, diodes, dual diodes, thyristors, thyristors, automatic identification of the above transistor pin distribution
Test NPN and PNP triode common-emitter current amplification factor, base-emitter threshold voltage, collector-emitter leakage current at the turn-off
Identification of Darlington transistors through triode base-emitter threshold voltage and high current amplification factor.
Detect power diodes and FET built-in protection diodes
Test FET gate-source turn-on threshold voltage, drain-source on-resistance, gate-source capacitance
Package Included:
1 x GM328 Transistor Tester
1 x Acrylic Case
The processor uses a high-performance single-chip ATMEAG328P DIP-28. With IC seat
The display unit uses a 160×128 pixel color display, the whole screen character number is 8×20, the color depth is 16 bits, graphics display component symbol
Rotary code switch control, one-button measurement, automatic shutdown
Powered by a 9V laminated battery, it can also be powered by a power adapter. The current is about 30mA, and the current is about 20nA after the shutdown
Automatic detection of NPN and PNP transistors, FETs, diodes, dual diodes, thyristors, thyristors, automatic identification of the above transistor pin distribution
Test NPN and PNP triode common-emitter current amplification factor, base-emitter threshold voltage, collector-emitter leakage current at the turn-off
Identification of Darlington transistors through triode base-emitter threshold voltage and high current amplification factor.
Detect power diodes and FET built-in protection diodes
Test FET gate-source turn-on threshold voltage, drain-source on-resistance, gate-source capacitance