About this product
Description:
KVM (https://pikvm.org/) is a very powerful open-source software that allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the virtual CD-ROM or flash drive. You can use your remote keyboard and mouse, or a KVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level access with no dependency on any remote ports, protocols, or services!
Specifications:
Compatibility: Pi Zero 2W
Model Name: KVM-A4
Shipping Weight: 0.275 kg
Shipping Dimensions: 19 × 16 × 5 cm
Power Input: 5.1Vdc +/-5% with ≥3A
Display: 0.96-inch OLED module
Features:
Designed especially for KVM ( Raspberry Pi based KVM over IP)
Compatible with Raspberry Pi Zero 2 W Only (Not support Raspberry Pi Zero W because KVM OS is no longer support Pi Zero W))
Fully compatible with KVM OS(Raspberry Pi Zero 2W, v2 platform)
Control a server and computer using a web browser
HDMI Full HD capture based on the TC358743 chip
OTG Keyboard & mouse; Mass Storage Drive emulation
Hardware Real Time Clock (RTC) with CR1220 coin battery socket
Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
Reserves the 4pin header & spacers for I2C OLED display
Product Interface:
Useful Link:
Official Document: https://pikvm.org/
KVM-A4: https://wiki.geekworm.com/PiKVM-A4
Installation Video: https://youtu.be/RUY6J6LVDhY
Package Included:
1 x X630-A4 V2.0 Expansion Board
1 x USB-A to Micro USB OTG Cable (Cable Length: 100cm / 39.37 inch)
2 x M2.5x4+4mm Spacers
2 x M2.5x17mm F/F Spacers
1 x M2.5x9mm F/F Spacer
1 x M2.5x15mm F/F Spacer
8 x M2.5x4mm Screws
1 x X630-A5 V1.0 Adapter Board
1 x M3.5*5mm Screw
1 x ATX Control Cable (Cable Length: 47cm / 18.50 inch)
1 x X630 HDMI to CSI-2 Module
1 x FPC Cable (8cm length)
1 x 0.96 inch OLED
2 x M2*6mm Screws
1 x Ethernet Cable(Length: 100cm)
Designed especially for KVM ( Raspberry Pi based KVM over IP)
Compatible with Raspberry Pi Zero 2 W Only (Not support Raspberry Pi Zero W because KVM OS is no longer support Pi Zero W))
Fully compatible with KVM OS(Raspberry Pi Zero 2W, v2 platform)
Control a server and computer using a web browser
HDMI Full HD capture based on the TC358743 chip
OTG Keyboard & mouse; Mass Storage Drive emulation
Hardware Real Time Clock (RTC) with CR1220 coin battery socket
Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
Reserves the 4pin header & spacers for I2C OLED display