About this product
Description:
FNIRSI SG-003A signal generator is mainly used for debugging industrial field PLC, process instrumentation, electric valves, and so forth. The Friendly operation interface is easy to use. The FNIRSI SG-003A signal generator is small and light but has a long standby time and high precision. Easy to carry when you go out to work. Adjustable button backlight and high-definition TFT color LCD screen make it more convenient for users to operate at night and during the day.
Specifications:
Active Current Output
Range: 0~24mA
Resolution: 0.01mA
Precision: ±(0.1%+0.005)
Max Load: 750Ω
Passive Current Output
Range: 0~24mA
Resolution: 0.01mA
Precision: ±(0.1%+0.005)
External Power Supply: 0~30V
Voltage output
Range: 0~24V
Resolution: 0.01V
Precision: ±(0.1%+0.005)
24V Loop
Range: 0~24mA
Resolution: 0.01mA
Precision: ±(0.1%+0.005)
Frequency/PWM Output
Range: 0~9999Hz
Resolution: 5 digits
Precision: ±2%
Current Input
Range: 0~24mA
Resolution: 0.01mA
Precision: ±(0.1%+0.005)
Voltage Input
Range: 0~30V
Resolution: 0.01V
Precision: ±(0.1%+0.005)
Battery
A single 3.7V 3000mAh lithium battery power supply
Display Size
2.4 Inch TFT Full Color LCD Screen
Program Automatic Lift Output
Support
Preset Output
Support
Signal Linear Conversion Output
Support
Output Timing
Support
Modbus Slave
Support
USB Firmware Upgrade
Support
Real-time Curve
Support
Features:
Expect the conventional signal input and output functions.
Signals are displayed as physical or engineering values, corresponding linearly.
Voltage and current have automatic output functions, it can choose a single rise, three modes of single drop, and cycle.
Four preset groups for quick output adjustment.
With input-to-output conversion, voltage conversion active current mode, passive mode, and current conversion voltage mode.
The output has a custom function, the upper and lower output limits can be set arbitrarily.
Displays input and output signal trends with adjustable sampling.
Automatically adjusts curve within a specified range over time.
Voltage input diagram, current input diagram, the frame rate is 10 frames.
PWM output can set frequency and duty cycle respectively.
Real-time curve: Real-time observation of changes in voltage and current
It is powered by a large-capacity lithium battery and is charged with a Type-C interface (5V). The capacity of the lithium battery is 3000mHA, fully charged in 4-6 hours, standby time is 26 hours, and the use time varies, based on the usage(It can be 8-10 hours with 20mA continuous output)
The high-definition TFT color LCD screen makes the reading more eye-catching. The resolution is 240*320. Low power consumption, Maximum power consumption: 0.32W
FNIRSI SG-003A communicates via RS485 with configuration software or PLC.
Firmware upgrade via USB emulated U disk.
Package Included:
1 x FNIRSI SG-003A Signal Generator
4 x Alligator Test Clips
1 x USB Charger
1 x User Manual
1 x Type-C Cable
Expect the conventional signal input and output functions.
Signals are displayed as physical or engineering values, corresponding linearly.
Voltage and current have automatic output functions, it can choose a single rise, three modes of single drop, and cycle.
Four preset groups for quick output adjustment.
With input-to-output conversion, voltage conversion active current mode, passive mode, and current conversion voltage mode.
The output has a custom function, the upper and lower output limits can be set arbitrarily.
Displays input and output signal trends with adjustable sampling.
Automatically adjusts curve within a specified range over time.
Voltage input diagram, current input diagram, the frame rate is 10 frames.
PWM output can set frequency and duty cycle respectively.
Real-time curve: Real-time observation of changes in voltage and current
It is powered by a large-capacity lithium battery and is charged with a Type-C interface (5V). The capacity of the lithium battery is 3000mHA, fully charged in 4-6 hours, standby time is 26 hours, and the use time varies, based on the usage(It can be 8-10 hours with 20mA continuous output)
The high-definition TFT color LCD screen makes the reading more eye-catching. The resolution is 240*320. Low power consumption, Maximum power consumption: 0.32W
FNIRSI SG-003A communicates via RS485 with configuration software or PLC.
Firmware upgrade via USB emulated U disk.