About this product
Description:
The Favorite LittleBee 30A-S OPTO ESC is already well-regarded and well-known for its dependability and strong thrust output. these Little Bee 30a BLHeli_S top-of-the-line models. The throttle response provided by BLHeli_S is very smooth. The primary cause of this is that the hardware is used to produce motor PWM.
30A-S OPTO Electronic Speed Controller With a maximum current draw of 30A, these Little Bee 30A ESCs offer enormous amperage for even the most demanding performance drones. For high-end or experimental systems, such as those using 6-inch tri-blade props or 5-second batteries, these ESCs are perfect. When used in conjunction with an appropriate flight controller, these ESCs enable one-wire pass-through, enabling flashing through clean flight.
Specifications:
Item Type: Brushless ESC
Input Supply Support: 2 – 6S LiPo
Burst Current: 35A
Bootloader: BLHeli S
Features:
OPTO ESC
Battery: 6-25.2V (2-6S Lipo)
PCB board: 4-layer blind pole board, 3 oz copper
Motor Wire: 70mm (20AWG)
Signal Wire: 120mm
Firmware: BLHeli_S (Supports Oneshot / Oneshot42 and Multishot / Active Braking – dampened light mode)
BEC: No BEC.
Lightweight
MCU: SILABS EFM8BB21F16, MCU running at 48MHz
Dedicated driver chip
Package Included:
1 x Favorite LittleBee 30A-S OPTO ESC Electronic Speed Controller
OPTO ESC
Battery: 6-25.2V (2-6S Lipo)
PCB board: 4-layer blind pole board, 3 oz copper
Motor Wire: 70mm (20AWG)
Signal Wire: 120mm
Firmware: BLHeli_S (Supports Oneshot / Oneshot42 and Multishot / Active Braking – dampened light mode)
BEC: No BEC.
Lightweight
MCU: SILABS EFM8BB21F16, MCU running at 48MHz
Dedicated driver chip