eSUN

eSUN PETG 3D Printer Filament 1.75mm 1kg Spool - Solid Purple

SKU IR0000263

This eSUN PETG spool supplies 1kg of 1.75mm filament in Solid Purple for compatible FDM 3D printers. Choose it when you want a purple finish for a prototype, desktop accessory

₹1587.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

eSUN PETG Solid Purple Filament, 1.75mm, 1kg

This eSUN PETG spool supplies 1kg of 1.75mm filament in Solid Purple for compatible FDM 3D printers. Choose it when you want a purple finish for a prototype, desktop accessory, model component or practical printed part. It is the solid-colour option, not Translucent Purple, PLA, PETG-CF or an unspooled refill.

A practical material for everyday parts

PETG is glycol-modified polyethylene terephthalate. eSUN describes its PETG as combining useful toughness and layer adhesion with relatively straightforward printing and low shrinkage. That balance makes it a useful step beyond decorative PLA for many non-critical parts. Print orientation, wall count, infill and the load applied still affect the result, so test the finished design rather than treating a material name as a strength guarantee.

The Solid Purple colour gives parts a consistent coloured appearance rather than the see-through effect intended by the separate translucent shade. The final gloss and visible layer pattern depend on the model, lighting and print settings. Gallery photographs show the purple spool alongside manufacturer examples of PETG applications; printers, clamps, containers, printed models and extra spools are illustrations and are not included.

Set up and tune for your printer

Use a PETG profile suited to your printer and check the temperature guidance printed on the supplied spool. eSUN's current PETG reference gives a 240-260°C nozzle and 75-90°C heated bed, but these are tuning references, not a promise that every printer or production batch uses identical settings. Start with a small test, confirm first-layer adhesion and tune flow and cooling before a long job. Do not exceed the temperature rating of the hotend, bed or build surface.

PETG can adhere strongly to some surfaces. Follow your build-plate maker's release-layer advice and allow the plate to cool before removing a part. Stringing or a rough finish can indicate a need to adjust temperature, travel, retraction or moisture control. Keep the loose filament end secured when the spool is not in use to reduce tangles.

Storage and handling

Store unused filament sealed with dry desiccant. Water resistance in a finished PETG print does not mean an open spool can never absorb moisture. Follow the spool's drying guidance if printing becomes inconsistent. Work in a ventilated area, keep hands clear of hot components and do not assume an ordinary printed part is suitable for food contact, medical use or safety-critical loads.

Specifications

Brand / material eSUN / PETG

Colour Solid Purple

Filament diameter 1.75mm

Net filament weight 1kg

Format Wound spool, not a refill

Nozzle reference 240-260°C, check supplied spool guidance

Bed reference 75-90°C heated bed, matched to build surface

Package contents 1 x 1kg Solid Purple PETG filament spool

The supplier uses PETG+ and PETG names for this product following a name update. Packaging may bear either name, and spool construction may vary between batches; the selected shade remains Solid Purple.

Gallery application photos illustrate PETG printing and material uses. The printer, finished models and other accessories shown are not included; this listing supplies one filament spool.

Specifications

Brand / material
eSUN / PETG
Colour
Solid Purple
Filament diameter
1.75mm
Net filament weight
1kg
Format
Wound spool, not a refill
Nozzle reference
240-260°C, check supplied spool guidance
Bed reference
75-90°C heated bed, matched to build surface
Package contents
1 x 1kg Solid Purple PETG filament spool
The supplier uses PETG+ and PETG names for this product following a name update. Packaging may bear either name, and spool construction may vary between batches; the selected shade remains Solid Purple.
Gallery application photos illustrate PETG printing and material uses. The printer, finished models and other accessories shown are not included; this listing supplies one filament spool.

More in Filament

You might also need