eSUN

eSUN PC-HT High-Temperature 3D Printer Filament 1.75mm 1kg Spool - White

SKU IR0000284

This 1.75mm eSUN PC-HT filament supplies 1kg of White material on a spool. It is intended for FDM printing of technical parts where ordinary display-model materials may not provide

₹3813.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

eSUN PC-HT White: heat-resistant polycarbonate for functional printing

This 1.75mm eSUN PC-HT filament supplies 1kg of White material on a spool. It is intended for FDM printing of technical parts where ordinary display-model materials may not provide enough heat resistance or mechanical performance. PC-HT builds on the toughness of polycarbonate while improving layer bonding and printing stability. The white finish suits prototypes and functional housings where a light-coloured surface is preferred.

Build parts for demanding conditions

PC-HT is designed for applications such as electronics housings, machine components and engineering prototypes. eSUN reports a heat distortion temperature of 113.6°C under its laboratory test conditions. This is a material test value, not a guaranteed continuous service temperature for every printed part. Geometry, wall thickness, print orientation, load and exposure time all affect performance, so test the finished component in its intended environment before putting it into service.

The material combines strength with impact resistance and improved bonding between deposited layers. It also aims to reduce warping and stringing compared with standard PC. That can help when printing precise mating surfaces and functional details, but careful calibration is still necessary. The manufacturer application photos show example parts in other colours; they illustrate possible uses of PC-HT and do not change the White colour supplied with this listing.

Printer setup and handling

Use a printer that can safely maintain the recommended 290-300°C nozzle temperature and 100-110°C bed temperature. A heated bed and enclosed printing chamber are recommended by eSUN. Confirm the hotend, build surface and enclosure are rated for these conditions before starting. Keep the printer in a ventilated working area and follow its safety instructions. This is a technical filament, not a drop-in substitute for low-temperature PLA profiles.

eSUN recommends drying at 70°C for more than six hours and using low part cooling. Keep unused filament sealed and dry. Begin with a small calibration print, then adjust flow, retraction, bed adhesion and speed for the printer and part. The published speed ceiling is a starting limit rather than a promise of equal results on every machine. Printed parts are not automatically certified for medical, food-contact or safety-critical use.

Specifications

Brand / material : eSUN / PC-HT polycarbonate-based filament

Colour : White

Filament diameter : 1.75mm

Net filament weight : 1kg on spool

Nozzle temperature : 290-300°C

Bed temperature : 100-110°C

Fan speed : 0-20%

Printing speed : Below 200mm/s

Drying guidance : 70°C for more than 6 hours

Heat distortion temperature : 113.6°C, manufacturer laboratory value

Package includes : 1 x 1kg spool of eSUN PC-HT White filament

Specifications

Brand / materialeSUN / PC-HT polycarbonate-based filament
ColourWhite
Filament diameter1.75mm
Net filament weight1kg on spool
Nozzle temperature290-300°C
Bed temperature100-110°C
Fan speed0-20%
Printing speedBelow 200mm/s
Drying guidance70°C for more than 6 hours
Heat distortion temperature113.6°C, manufacturer laboratory value
Package includes1 x 1kg spool of eSUN PC-HT White filament

More in Filament

You might also need