About this product
eSUN HIPS Black Filament, 1.75mm, 1kg
Build support structures and standalone models with this 1kg spool of eSUN HIPS in Black. HIPS means high-impact polystyrene. This is 1.75mm filament for a compatible FDM printer, not resin, a refill coil or a water-soluble PVA material. The Black shade is separate from the Cold White and Natural options sold in the same material family.
A support material with another removal route
eSUN describes HIPS as soluble in limonene and notes that its printing behaviour is similar to ABS. This makes it useful when a design needs temporary support in places that are difficult to reach with ordinary tools. For a model and support made from different materials, the printer needs a suitable multi-material or dual-extrusion arrangement. A single-nozzle printer does not gain that capability simply by loading this spool.
Check the compatibility of the main printing material, support interface and removal liquid before committing to a large model. Print a small test piece first. Dissolution time and the final surface depend on the geometry, support thickness, liquid and processing conditions. Do not assume that every polymer, coating, adhesive or insert will tolerate the same treatment. HIPS can also be printed as the main model material when its properties suit the job.
Set up the printer before starting
The manufacturer's current HIPS guide gives an extruder reference of 230-270°C, a heated-bed reference of 100-115°C and a fan reference of 0%. It requires a heated bed and recommends enclosed-chamber printing. These are starting references, not a guarantee for every printer. Follow the supplied spool label and a tested profile, and check that the hotend, bed and enclosure are rated for the intended temperatures.
Use suitable workspace ventilation and emission control during printing. Avoid touching hot parts and allow the bed and model to cool before removal. Keep unused filament sealed with desiccant and away from dust. Secure the loose end when unloading so it cannot slip under other turns and tangle.
Plan the removal step safely
Limonene is not included. Before using any removal liquid, read its label and safety data sheet, choose the stated protective equipment and ventilation, and follow its storage and disposal instructions. Keep the liquid away from ignition sources and do not heat it unless its manufacturer explicitly permits that process. Never treat a citrus smell as proof that a solvent is harmless.
Specifications
Brand
eSUN
Material
HIPS, high-impact polystyrene
Colour
Black
Nominal diameter
1.75mm
Net filament weight
1kg
Supply format
Wound spool
Extruder reference
230-270°C
Bed reference
100-115°C; heated bed required
Fan reference
0%
Printing environment
Enclosed chamber recommended
Removal medium
Limonene, supplied separately; not water-soluble
Included
1 x Black HIPS filament spool, 1kg
Spool design and packaging may vary by batch. The gallery shows Black HIPS on different spool designs. Printed models, printers, containers, removal liquid and other equipment shown are not included.