eSUN

eSUN ePLA-LW Lightweight Foaming PLA 3D Printer Filament 1.75mm 1kg Spool - White / Natural

SKU IR0000262

eSUN ePLA-LW is an active-foaming PLA filament for FDM 3D printers. This listing supplies one 1kg spool of 1.75mm filament in the White/Natural shade.

₹3876.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

eSUN ePLA-LW Lightweight Foaming PLA, White/Natural, 1.75mm, 1kg

eSUN ePLA-LW is an active-foaming PLA filament for FDM 3D printers. This listing supplies one 1kg spool of 1.75mm filament in the White/Natural shade. It is designed for projects where reducing printed weight matters, including model aircraft skins, display models and cosplay props. It is not ordinary PLA, pre-foamed filament or the separate high-speed ePLA-LW formulation.

Control expansion through temperature

The material expands as it passes through a sufficiently hot nozzle. eSUN describes an unfoamed printing range of 190-210°C and a foaming range of about 210-270°C. Changing temperature and extrusion flow changes the amount of expansion, so the same spool can be tuned for different balances of weight, surface finish and strength. This requires a dedicated profile and test pieces rather than a standard PLA profile used without adjustment.

The manufacturer reports a foaming volume ratio up to 220% and a foamed density as low as 0.54g/cm³ under its test conditions. Those are upper or lower reference limits, not guaranteed results for every printer or part. The filament itself has a nominal unfoamed density of 1.2g/cm³. Gallery comparisons of material use apply to suitably tuned foamed prints of the same volume; they do not mean the package contains more than 1kg of filament.

For lightweight shapes and paintable surfaces

Foaming produces a matte, fine-textured surface that helps make layer lines less noticeable. The manufacturer also describes the printed surface as easy to paint, which is useful for scale models and props. The photos show the supplied light-coloured filament and example aircraft or printed parts. Aircraft, motors, electronics, paints and finished models are illustrations and are not included. White/Natural describes the filament shade; colour can become warmer or slightly yellow after high-temperature foaming.

Printing guidance

eSUN gives a 190-270°C nozzle range, 45-60°C build platform and 100% fan as starting references. Its technical sheet lists a 40-100mm/s speed range. Tune a small wall or calibration model first, then adjust flow for the expansion you measure. Retraction is less effective while material continues to foam inside the hotend, so some stringing can occur. Part design and travel moves need attention as well as temperature.

Check the printer's temperature rating before using the upper range. eSUN warns against sustained operation above 250°C on unsuitable PTFE-lined hotends. Use a hotend designed for the required temperature and follow the printer manufacturer's limits. Do not assume a lightweight printed aircraft component is flight-ready without checking its design, assembly and strength.

Specifications

Brand / material eSUN ePLA-LW, active-foaming PLA

Colour White/Natural

Diameter / net weight 1.75mm / 1kg filament

Nozzle temperature reference 190-270°C

Foaming temperature reference Approximately 210-270°C

Bed temperature / fan 45-60°C / 100%

Speed reference 40-100mm/s, tuned to the printer and model

Density reference 1.2g/cm³ unfoamed; as low as 0.54g/cm³ when foamed

Package contents 1 x 1kg White/Natural ePLA-LW filament spool

Keep unused material sealed and dry. Printed properties depend on temperature, flow, orientation and geometry. Work in a ventilated area and keep hands clear of hot printer components.

The package contains filament only. Aircraft, model parts and additional spools shown in the manufacturer's feature images illustrate possible applications or the material family; they are not included. Spool construction and packaging may vary between production batches.

Specifications

Brand / material
eSUN ePLA-LW, active-foaming PLA
Colour
White/Natural
Diameter / net weight
1.75mm / 1kg filament
Nozzle temperature reference
190-270°C
Foaming temperature reference
Approximately 210-270°C
Bed temperature / fan
45-60°C / 100%
Speed reference
40-100mm/s, tuned to the printer and model
Density reference
1.2g/cm³ unfoamed; as low as 0.54g/cm³ when foamed
Package contents
1 x 1kg White/Natural ePLA-LW filament spool
Keep unused material sealed and dry. Printed properties depend on temperature, flow, orientation and geometry. Work in a ventilated area and keep hands clear of hot printer components.
The package contains filament only. Aircraft, model parts and additional spools shown in the manufacturer's feature images illustrate possible applications or the material family; they are not included. Spool construction and packaging may vary between production batches.

More in Filament

You might also need