About this product
eSUN ABS+ Fire Engine Red Filament, 1.75mm, 1kg
Print fire engine red prototypes and workshop models with this 1kg spool of eSUN ABS+. The filament has a nominal diameter of 1.75mm and is intended for compatible FDM printers that can maintain the temperatures needed for ABS-family materials. It is supplied on a spool, not as a refill coil. This is Fire Engine Red ABS+, not fire engine red PLA, PETG, resin or the separate ABS+HS formulation.
A material for functional models
ABS+ is eSUN's modified ABS printing material. The manufacturer positions it as a way to reduce the shrinkage and printing difficulties of conventional ABS while retaining useful toughness and strength. That does not mean warping is impossible. A stable print environment, suitable build surface and a well-tuned profile still matter, especially for broad bases, thin walls and long parts.
Use a small test model to explore the fit and finish before printing a full enclosure, fixture or demonstration assembly. Fire Engine Red can make a prototype easy to distinguish from production parts or from another revision on the bench. The final result depends on layer orientation, wall thickness, infill and the printer profile as much as the material name. Test any part that will carry a load or work near heat in its intended conditions.
Prepare the printer and workspace
eSUN's current ABS+ guide gives an extruder reference of 230-270°C and a heated-bed reference of 95-110°C. It recommends enclosed-chamber printing and lists a heated bed as required. Start from the supplied spool's instructions and a suitable profile for your printer, rather than treating these ranges as a single setting for every machine. Check that the hotend, build plate and printer enclosure are rated for the temperatures you intend to use.
Print in a well-ventilated workspace with suitable emission control. A lower odour claim does not mean that ABS+ is emission-free or safe to use in an unventilated occupied room. Keep hands clear of hot parts and wait for the bed and model to cool before removal. Follow the build-surface maker's guidance for adhesion and release.
Store it for the next job
Keep unused filament sealed with desiccant and away from dust. Secure the loose end after unloading so it cannot slip under other turns. If feeding or surface quality changes, check moisture, the filament path and nozzle condition before changing several settings at once.
Specifications
Brand
eSUN
Material
ABS+
Colour
Fire Engine Red
Nominal diameter
1.75mm
Net filament weight
1kg
Supply format
Wound spool
Extruder reference
230-270°C
Bed reference
95-110°C; heated bed required
Printing environment
Enclosed chamber recommended
Included
1 x Fire Engine Red ABS+ filament spool, 1kg
Packaging and spool design may vary by batch. Gallery images beyond the Fire Engine Red spool photos illustrate the ABS+ family and possible applications. Other colours, printed models, printers, tools and equipment shown are not included.