ESP8266 Adapter Plate for ESP-07 ESP-12E ESP-12F - RS4874

SKU RS4874

ESP8266 Adapter Plate for ESP-07, ESP-12E and ESP-12F Use this white breakout PCB to bring the small solder pads of a compatible ESP8266 module out to a breadboard-friendly header

₹73.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

ESP8266 Adapter Plate for ESP-07, ESP-12E and ESP-12F

Use this white breakout PCB to bring the small solder pads of a compatible ESP8266 module out to a breadboard-friendly header layout. It is useful when building a custom Wi-Fi sensor, prototyping an IoT controller or fitting an ESP-12 module to a larger circuit.

This is an adapter plate, not a complete Wi-Fi development board. The ESP8266 module, USB-to-serial programmer and power supply are separate items. Soldering is required.

Key features

Adapter footprint for compatible ESP-07 and ESP-12 series modules, including ESP-12E and ESP-12F.

Standard 2.54mm header layout for prototyping and jumper-wire connections.

Printed signal labels help identify the module connections.

Onboard resistor positions support the module's enable and boot connections.

Unpopulated regulator area supports a suitable optional regulator; verify its package, pinout and supporting components before fitting one.

Specifications

Item ESP8266 module adapter / breakout PCB

Compatible module family ESP-07, ESP-12E, ESP-12F with matching footprint

PCB colour White

Header pitch 2.54mm

Assembly Solder-in module and header connections

USB interface Not included

Power and assembly notes Check the adapter and your module pinout before soldering. An ESP8266 module uses 3.3V power and logic. The bare adapter does not make the module or its GPIO pins 5V tolerant. Do not connect 5V directly to the module's VCC or GPIO pins.

On the common white adapter layout, the centre zero-ohm link connects the supply directly to module VCC when no regulator is fitted. A regulator installation needs the correct link configuration and suitable capacitors. Inspect your particular board rather than assuming that a regulator is already installed.

For programming, use a suitable 3.3V-logic USB-to-serial adapter and a stable 3.3V supply with enough current for the ESP8266. Connect ground between the programmer and module, and configure the enable, reset and boot pins for your module. This plate is a wiring aid, not an automatic USB programmer.

Package contents 1 x ESP8266 adapter plate. ESP8266 module, USB programmer, power supply and demonstration accessories are not included.

Adapter footprint for compatible ESP-07 and ESP-12 series modules, including ESP-12E and ESP-12F.

Standard 2.54mm header layout for prototyping and jumper-wire connections.

Printed signal labels help identify the module connections.

Onboard resistor positions support the module's enable and boot connections.

Unpopulated regulator area supports a suitable optional regulator; verify its package, pinout and supporting components before fitting one.

Specifications

Item
ESP8266 module adapter / breakout PCB
Compatible module family
ESP-07, ESP-12E, ESP-12F with matching footprint
PCB colour
White
Header pitch
2.54mm
Assembly
Solder-in module and header connections
USB interface
Not included

More in ESP32 & ESP8266

You might also need