About this product
Description:
ESP32-CAM is a WiFi And a Bluetooth dual-mode development board that uses PCB onboard antennas and cores based on ESP32 chips. The ESP32 Cam can work independently as a minimum system. ESP integrates WiFi, traditional Bluetooth and BLE beacons with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensors, Hall sensors, temperature sensors, etc.
The ESP32 Cam is fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards; it can be used in master mode to build an independent network controller or as a slave to other host MCUs to add networking capabilities to existing devices. The ESP32-CAM can be widely used in various IOT applications. The ESP32 Cam is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IOT applications. The ESP32 Cam is an ideal solution for IOT applications.
Specifications:
Camera Sensor: RHYX M21-45 2MP Camera Module
Microcontroller: ESP32
SPI Flash default: 32Mbit
RAM: Internal 520 KB + external 4 M PSRAM
Bluetooth: Bluetooth 4.2BR/EDR and BLE standards
Wi-Fi: 802.11 b/g/n/e/i
Support Interface: UART, SPI, I2C, PWM
Support TF card: Maximum support 4G
IO Port: 9
Security: WPA/WPA2/WPA2-Enterprise/WPS
Power Supply Range: 5V
Operating Temperature: -20°C ~ 85°C
Features:
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4 M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support RHYX M21-45 camera with built-in flash
Support for images WiFi upload
ESP32 Cam supports TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
ESP32 Cam supports STA/AP/STA+AP working mode
Support Smart Config/Air Kiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
ESP32 Cam supports secondary development
Package Included:
1 x ESP32 Cam WiFi Bluetooth Camera Module
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Low-power dual-core 32-bit CPU for application processors
Up to 240MHz, up to 600 DMIPS
Built-in 520 KB SRAM, external 4 M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support RHYX M21-45 camera with built-in flash
Support for images WiFi upload
ESP32 Cam supports TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
ESP32 Cam supports STA/AP/STA+AP working mode
Support Smart Config/Air Kiss One-click distribution network
Support for serial local upgrade and remote firmware upgrade (FOTA)
ESP32 Cam supports secondary development