About this product
ESP-01 ESP8266 Serial WiFi Module
Add 2.4GHz WiFi to a compact electronics project with this ESP-01 module. Based on the ESP8266, it combines a wireless controller, onboard PCB antenna and an eight-pin header. Use its UART connection with a host microcontroller and suitable firmware, or develop a small standalone networked application within the module's limited pin and memory resources.
Key features
IEEE 802.11 b/g/n WiFi on the 2.4GHz band.
ESP-01 eight-pin form factor with onboard PCB antenna.
UART and GPIO connections for embedded integration.
Station, access-point and combined operating modes with compatible firmware.
Suitable for wireless sensor interfaces, home-automation prototypes and serial-to-WiFi experiments.
Power and wiring
This is a 3.3V module, not a 5V-tolerant Arduino shield. Provide a stable regulated 3.3V supply with adequate peak-current capacity; Ai-Thinker's ESP-01 specification calls for more than 300mA. Use appropriate logic-level conversion when connecting a 5V host. Connect ground, supply, enable, reset and boot-mode signals according to the ESP-01 pinout, and keep the antenna clear of metal and crowded wiring.
Programming notes
A compatible USB-to-UART adapter and boot-mode wiring are required for serial flashing; they are not included. AT commands are available only when AT firmware is installed. Firmware version, baud rate and flash capacity should be checked on the supplied unit before choosing an image. The eight-pin connector does not expose every peripheral available inside the ESP8266 chip.
Package contents
1 x ESP-01 ESP8266 serial WiFi module
IEEE 802.11 b/g/n WiFi on the 2.4GHz band.
ESP-01 eight-pin form factor with onboard PCB antenna.
UART and GPIO connections for embedded integration.
Station, access-point and combined operating modes with compatible firmware.
Suitable for wireless sensor interfaces, home-automation prototypes and serial-to-WiFi experiments.