ELECROW

ELECROW Crowtail - ESP8266 IoT Board Arduino Compatible All-In-One ESP8266 WiFi Development Board USB, Battery Charging - RS7057

SKU RS7057

This is a Crowtail-ESP8266 IoT Board - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging.

₹733.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This is a Crowtail-ESP8266 IoT Board - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It’s an ESP8266 WiFi module with all the extras you need, The most important part is an ESP8266 WiFi microcontroller clocked at 80 MHz and 3.3V logic.

This IoT Microcontroller Board contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial chip that can upload code. It also has auto-reset so no noodling with pins and reset button pressings. To make it easy to use for portable projects, we added a connector for 3.7V Lithium polymer batteries and built-in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, and then plug in the USB to recharge.

The ESP8266 IoT Development Board will automatically switch over to USB power when it's available. Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua. (It comes preprogrammed with the Lua interpreter) We also toss in some header so you can solder it in and plug it into a solderless breadboard. Lipoly battery and USB cable are not included (but we do have lots of options in the shop if you'd like!)

Specifications:

Model: DP082666E

CP2012 USB-Serial converter onboard with 921600 max baud rate for uploading.

9 x GPIO pins - can also be used as I2C and SPI

Power/enable pin

4 mounting holes

Reset button

Features:

lightweight

3.3V regulator with 500mA peak current output

Auto-reset support for getting into bootload mode before firmware upload

ESP8266 @ 80MHz with 3.3V logic/power

Built-in WiFi 802.11 b/g/n

CP2012 USB-Serial converter onboard with 921600 max baud rate for uploading

Analog inputs 1.0V max

Built-in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger

Pin #0 red LED for general purpose blinking. Pin #2 blue LED for boot loading debug general purpose blinking

Pin Description:

Micro USB port- it use for uploading the program and updating firmware, you can also charge the battery

Battery interface- you can power this board with a lipo battery by this port

Reset button- to have a reset

Flash button- is used to update the firmware

Useful Links:

Crowtail-ESP8266 IoT Board User Manual

Package Included:

1 x ELECROW Crowtail - ESP8266 IoT Board Arduino Compatible All-In-One ESP8266 WiFi Development Board USB, Battery Charging

lightweight

3.3V regulator with 500mA peak current output

Auto-reset support for getting into bootload mode before firmware upload

ESP8266 @ 80MHz with 3.3V logic/power

Built-in WiFi 802.11 b/g/n

CP2012 USB-Serial converter onboard with 921600 max baud rate for uploading

Analog inputs 1.0V max

Built-in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger

Pin #0 red LED for general purpose blinking. Pin #2 blue LED for boot loading debug general purpose blinking

Specifications

ModelDP082666E
CP2012 USB-Serial converter onboard with 921600 max baud rate for uploading.
9 x GPIO pins - can also be used as I2C and SPI
Power/enable pin
4 mounting holes
Reset button

More in ESP32 & ESP8266

You might also need