About this product
Description:
DJI Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.
Specifications:
Model: DJI NAZA-M V2
Input Voltage: MC: 4.8 to 5.5 V VU: 7.4 to 26.0 V (2S to 6S LiPo recommended)
Power Consumption: 1.5W
Operating Temperature Range: -10 to 50°C
Firmware: NAZAM V2
Features:
DJI NAZA M V2 Flight Controller is an all-In-One Compact Multi-Rotor Autopilot System
New Assistant Software for Smartphones
Supported Multi-rotors Quad-rotor: I4, X4
Hex-rotor: I6, X6, IY6, Y6
Octo-rotor I8, V8, X8
Free Ground Station
DJI NAZA M V2 Flight Controller has a take-Off Assistance
Multiple Flight Control Modes and Intelligent Switching
GPS Module Available for Accurate Position Stabilization
Intelligent Orientation Control (IOC)
DJI NAZA M V2 Flight Controller supports General, PPM, and S-Bus Receivers
Arm/Disarm Modes for Safe Motor Starting
2-Axis Gimbal Stabilization
Two Levels of Low Voltage Warnings and Protection
DJI NAZA M V2 Flight Controller supports Remote Gain Adjustment from the Transmitter
Single Motor Failure Protection
Supported ESC Output 400 Hz refresh frequency
Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
DJI NAZA M V2 Flight Controller has enhanced Failsafe Features, Including Auto Return-to-Home.
Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products.
DJI NAZA M V2 Flight Controller supports 9 Different Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems.
Difference Between NAZA-M Lite/ NAZA-M V1/ NAZA-M V2:
Product
Target Customer
Hardware
Software
Function Extension Ability
Major Components
NAZA-M Lite
AP/RC entry level
Based on the NAZA V1 platform; no extension ability
NAZA lite Independent assistant software and firmware;
1. GPS (Optional)
2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD)
MC
GPS(optional)
BEC/LED(Will have independent BEC and LED in the future)
NAZA-M V1
AP/RC hobbyist
Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function;
Share the same NAZAM V2 assistant software and firmware;
1. GPS (Optional)
2. Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
MC
GPS(optional)
BEC/LED
DJI NAZA M V2 Flight Controller
AP/RC hobbyist
Optimized hardware structure;
Independent PMU module with amazing function extension ability;
Independent LED module;
Amazing function extension: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
MC
GPS
NAZAPMU V2
LED
System Requirements:
Assistant Software Windows: 8, 7, XP SP3
OS X: 10.6 or later
Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
Flight Performance:
Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
Horizontal: ±8.2′ / ±2.5 m
Max Angular Speed 200°/s
Max Tilt Angle 35°
Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
Descent: 14.8 ft/s / 4.5 m/s
Useful Link:
DJI NAZA M V2 Flight Controller User Manual
Package Included:
1 x DJI NAZA M V2 Flight Controller
1 x Power Management Unit
8 x Servo Cable
1 x LED Module
1 x Micro USB Cable
2 x Adhesive Tape
1 x GPS Module
DJI NAZA M V2 Flight Controller is an all-In-One Compact Multi-Rotor Autopilot System
New Assistant Software for Smartphones
Supported Multi-rotors Quad-rotor: I4, X4
Hex-rotor: I6, X6, IY6, Y6
Octo-rotor I8, V8, X8
Free Ground Station
DJI NAZA M V2 Flight Controller has a take-Off Assistance
Multiple Flight Control Modes and Intelligent Switching
GPS Module Available for Accurate Position Stabilization
Intelligent Orientation Control (IOC)
DJI NAZA M V2 Flight Controller supports General, PPM, and S-Bus Receivers
Arm/Disarm Modes for Safe Motor Starting
2-Axis Gimbal Stabilization
Two Levels of Low Voltage Warnings and Protection
DJI NAZA M V2 Flight Controller supports Remote Gain Adjustment from the Transmitter
Single Motor Failure Protection
Supported ESC Output 400 Hz refresh frequency
Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
DJI NAZA M V2 Flight Controller has enhanced Failsafe Features, Including Auto Return-to-Home.
Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products.
DJI NAZA M V2 Flight Controller supports 9 Different Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems.