2 Wheel Smart Car Chassis Kit with Battery and L298N Motor Driver Module- RK101-RS342-AA034
PACKAGE INCLUDED
₹1650.00 GST added at checkout
SKU RS1561
Learn soldering, basic electronics and motor control by building a small robot that follows a dark line on a light surface.
₹298.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
D2-1 DIY Line-Following Robot Car Kit
Learn soldering, basic electronics and motor control by building a small robot that follows a dark line on a light surface. This D2-1 kit uses light-sensitive resistors and an LM393 comparator circuit to respond to differences in reflected light. It is a hands-on assembly project, not a ready-to-run car or an Arduino programming kit.
What you build
A two-wheel tracking car with geared DC motors.
Reflective light sensing using LEDs and photoresistors.
LM393-based analog comparison and transistor motor control.
Adjustable sensitivity for balancing the two sensing channels.
A PCB chassis with battery holder and front support.
Assembly requirements Soldering and mechanical assembly are required. Prepare a soldering iron, solder, cutters, a small screwdriver and a multimeter. Identify resistor values before assembly, and check the orientation of the IC socket, transistors, LEDs and electrolytic capacitors. Inspect for bridges and reversed parts before applying power. Children should work with suitable adult supervision when using hot tools.
Power and testing The D2-1 circuit operates from 3V, using two AA cells in the supplied style of holder. Batteries are not included. Install the light sensors and illuminating LEDs facing the track, then adjust the potentiometers under steady room lighting. Test each motor direction and sensor response before trying a complete course.
Use a clear dark track on a matte light background. Tracking depends on line width, surface reflectivity, sensor height, ambient light and adjustment; tight corners or glossy surfaces can cause it to lose the line. Completed-car photos illustrate the assembled result.
Package contents 1 x D2-1 line-following car kit with PCB, electronic components, motors, wheels, battery holder and assembly hardware
More in Chassis & Robot Platforms
PACKAGE INCLUDED
₹1650.00 GST added at checkout
The 2-Wheel Smart Car Chassis is a compact and versatile robotic platform designed for DIY robotics, STEM education, and smart vehicle projects.
₹525.00 GST added at checkout
USB AB Cable for Arduino
₹4500.00 GST added at checkout
This 4 Wheel Robotics Platfrom Will Contain Four DC Geared Motor Four White Double Screw Mount Tyre, And One Small Chasis.
₹1543.50 GST added at checkout