DFRobot

DFROBOT Gravity: Digital MOSFET Power Switch High-Current MOSFET Power Controller Module For Arduino & Embedded Systems

SKU REES-BF5ABF8B0E2F7BCF

This module acts as a highly efficient electronic switch, utilizing a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) to control high-current loads.

₹606.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The DFRobot Gravity: MOSFET Power Controller addresses a common challenge in microcontroller projects: driving high-current devices with limited GPIO output. While relays are traditionally used, they require a significant current to activate their coils, posing a problem for microcontrollers like the Intel Edison, Intel Joule, Lilypad, and Raspberry Pi, which offer lower GPIO current capabilities.

This module acts as a highly efficient electronic switch, utilizing a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) to control high-current loads. Think of it as a solid-state relay or MOSFET driver offering superior performance and versatility. Applying a digital high-level signal (3.3V to 10V) to the control pin instantly activates the MOSFET, allowing current to flow to your connected device. Conversely, a low-level signal turns the MOSFET off, halting current flow.

Unlike mechanical relays, the MOSFET Power Controller is fully compatible with a wide range of microcontrollers, including Arduino, Raspberry Pi, and LattePanda, thanks to its 3.3V to 10V logic level compatibility. The power input (VIN) supports a wide voltage range of 5V to 36V and can handle currents up to 20A. For currents exceeding 10A, an external heatsink is recommended to ensure optimal performance and prevent overheating.

Note: It works with direct current (DC) only!

Specifications:

VIN Operating Voltage: 5V-36V DC

Logic Operating Voltage: 3.3~10V DC

Switching Frequency: 0-1KHz

Operating Temperature: -55℃-155℃

VIN Operating Current: 0A-20A (Suggest external heat sink when the current over 10A )

Logic Control Signal: 3.3~10V DC

Switching Character: T(on)=20us/T(off)=50us

Interface Type: PH2.0-3P

Dimension: 44*32 mm/ 1.73*1.26 inches

Features:

The MOSFET power controller is a module that can drive a large current device with limited current GPIO.

Plug and play, easy to use.

It makes the module compatible with the Arduino IO expansion shield.

It works as a MOSFET relay or MOSFET driver.

Project:

Smart Compost Bin Monitoring System -Based on 4G IoT and SHT20

Document:

Product WIKI

Package Included:

1 x DFRobot Gravity: MOSFET Power Controller

The MOSFET power controller is a module that can drive a large current device with limited current GPIO.

Plug and play, easy to use.

It makes the module compatible with the Arduino IO expansion shield.

It works as a MOSFET relay or MOSFET driver.

Specifications

VIN Operating Voltage5V-36V DC
Logic Operating Voltage3.3~10V DC
Switching Frequency0-1KHz
Operating Temperature-55℃-155℃
VIN Operating Current0A-20A (Suggest external heat sink when the current over 10A )
Logic Control Signal3.3~10V DC
Switching CharacterT(on)=20us/T(off)=50us
Interface TypePH2.0-3P
Dimension44*32 mm/ 1.73*1.26 inches

More in Sensor Modules

You might also need