DFRobot

DFRobot Gravity: Analog Signal Isolator Electrical 5V Isolated Power For 3-pin Analog Sensor High Accuracy 1:1 Signal Transfer

SKU REES-BD663923814F67E0

The DFRobot Gravity Analog Signal Isolator prevents electrical interference between sensors, particularly those like pH and conductivity sensors that can disrupt each other's

₹3636.00

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

The DFRobot Gravity Analog Signal Isolator prevents electrical interference between sensors, particularly those like pH and conductivity sensors that can disrupt each other's readings. It features onboard 5V isolated power, eliminating the need for external power supplies, and uses plug-and-play connectors for DFRobot 3-pin analog sensors. With a 1:1 signal transmission ratio, it minimizes impact on sensor outputs and requires no code changes. Designed for applications like multi-parameter water quality monitoring, it's compatible with most DFRobot analog sensors. The module requires a stable 5V input, consumes significant current, and isolates the sensor and MCU grounds. Note that the isolator regenerates during operation.

Specifications:

Operating Voltage: 5.0V

Response Time: 4 seconds (Typ)

Analog Error between Two Terminals: <± 20mV (Typ)

Conector Type: PH2.0-3P

No-load Current: 75mA

Dimension: 42 * 32mm / 1.65 * 1.26 inch

Non-isolation Terminal (MCU Terminal)

Supply Voltage: 5.0 ± 0.1V

Analog Output: 0 ~ 5.0V

Isolation Terminal (SEN Terminal)

Output Voltage: 5.0 ± 0.2V

Analog Input: 0 ~ 5.0V

Features:

Remove earth loop errors which are caused by noise & signal interference.

Provide electrical (galvanic) isolation between the input and output circuits.

Signal isolators can also be used to amplify signals

Enable instruments to be added to an overburdened loop, or to step down dangerous, high-voltage signals to safer levels.

Analog Error between Two Terminals: <± 20mV (Typ).

Non-isolation Terminal (MCU Terminal).

Supply Voltage: 5.0 ± 0.1V.

Analog Output: 0 ~ 5.0V.

Isolation Terminal (SEN Terminal).

Output Voltage: 5.0 ± 0.2V.

Analog Input: 0 ~ 5.0V.

Projects:

Project 1. How to use the DFRobot Signal Isolator module with an Arduino

Useful Links:

Wiki Analog Signal Isolator

Schematic

Layout

Datasheet

Package Included:

1 x Gravity: Analog Signal Isolator

2 x PH2.0-3P Cable

Remove earth loop errors which are caused by noise & signal interference.

Provide electrical (galvanic) isolation between the input and output circuits.

Signal isolators can also be used to amplify signals

Enable instruments to be added to an overburdened loop, or to step down dangerous, high-voltage signals to safer levels.

Analog Error between Two Terminals: <± 20mV (Typ).

Non-isolation Terminal (MCU Terminal).

Supply Voltage: 5.0 ± 0.1V.

Analog Output: 0 ~ 5.0V.

Isolation Terminal (SEN Terminal).

Output Voltage: 5.0 ± 0.2V.

Analog Input: 0 ~ 5.0V.

Specifications

Operating Voltage5.0V
Response Time4 seconds (Typ)
Analog Error between Two Terminals<± 20mV (Typ)
Conector TypePH2.0-3P
No-load Current75mA
Dimension42 * 32mm / 1.65 * 1.26 inch
Non-isolation Terminal (MCU Terminal)
Supply Voltage5.0 ± 0.1V
Analog Output0 ~ 5.0V
Isolation Terminal (SEN Terminal)
Output Voltage5.0 ± 0.2V
Analog Input0 ~ 5.0V

More in Sensor Modules

You might also need