Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module - RS3629

SKU RS3629

This 5V 12A Current Detection Module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A.

₹313.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

This 5V 12A Current Detection Module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM; NC, and NO three ports to control the external circuit on and off, to achieve over-current protection.

Specifications:

Operating voltage: DC12V

Operating current: <20MA

Operating frequency range: 20Hz ~ 400Hz

Output mode: Switch signal output

Maximum detection wire diameter: 5.2mm

Mounting hole: hole diameter is 3mm, hole distance: 52.5mm

Operating environment: -40 ~ +85

The current detection range: AC0.3A-5A

Function:

Current detection resolution can change the parameter of resistance parameters

The Current Detection Module has output over-current switching signal output

The over-current signal setting critical point adjustable

Using Instructions:

By setting the potentiometer to set the overcurrent protection point, the clockwise adjustment reduces the detection current. As bellows:

Measured the wire through the current transformer, and connected VCC and GND to the DC12V power supply;

Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on; is connected to the relay means activated), then reduce or cut off the current flowing through the tested wire; if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected; is connected to the relay means it release);

When reducing or cutting off the current flowing through the wire; the relay is not released, and will still need to continue to adjust the potentiometer to find the over-current protection point.

Package Included:

1 x Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module

Specifications

Operating voltageDC12V
Operating current<20MA
Operating frequency range20Hz ~ 400Hz
Output modeSwitch signal output
Maximum detection wire diameter5.2mm
Mounting holehole diameter is 3mm, hole distance: 52.5mm
Operating environment-40 ~ +85
The current detection rangeAC0.3A-5A

More in Sensor Modules

You might also need