REES52

Control the intensity of led using LDR interfacing with Arduino Uno - KT590

SKU KT590

In this project, we will work on a Photoresistor (Photovaristor) which includes the photoelectric effect of the semiconductor.

₹1498.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

INTRODUCTION

In this project, we will work on a Photoresistor (Photovaristor) which includes the photoelectric effect of the semiconductor. Photovaristor is commonly applied in the measurement of light and light control.

HARDWARE REQUIRED

Arduino UNO with USB cable - 1

Male to Male jumper wires – 20 pieces

9v Battery - 1

Snapper with DC Jack – 1

400 pt. Breadboard - 1

LDR Photoresistor -2

10KΩ Resistor – 5

220Ω Resistor – 5

Led - 2

NOTE: A 9V Battery is used as an external power supply.

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino)

Click To Download: https://www.arduino.cc/en/Main/Software

CIRCUIT CONNECTION

Attach LED and LDR on the Breadboard.

Connect GND of Arduino Uno with Breadboard to make further GND connections.

Connect 5V Pin of Arduino Uno with the Breadboard for further 5V power supply connections.

Connect the positive terminal of LED with the Digital Pin 11 of the Arduino Uno.

Connect the negative terminal of the LED with the GND rail of the Breadboard via the 220Ω resistor.

Connect one leg of LDR with the 5V power supply rail of the Breadboard via a 10KΩ resistor on one end and connect another end with the Analog Pin A0 of Arduino Uno.

Connect another leg of the LDR with the GND rail of the Breadboard.

CODE

https://docs.google.com/document/d/e/2PACX-1vSojp59CSWMgtJ6htaTOSmUPjdXDgI94o_s6Nx_JAbaNogptVAvrp1Wo7dxOTyljTuwOeRGgrbbYc8J/pub

WORKING AND OUTPUT

Welcome to the Arduino-based project in which we have used the analogWrite (PWM interface, analogue value) function. In this project, we will read the analog value of the potentiometer and assign the value to the PWM port, so there will be a corresponding change to the brightness of the LED. One final part will be displaying the analogue value on the screen. You can consider this as the "analog value reading" project adding the PWM analog value assigning part. After downloading the program, when we rotate the potentiometer knob, we can see changes in the displaying value, also an obvious change in the LED brightness on the breadboard.

More in Arduino Boards

You might also need