Connect CMOS OV7670 camera with Arduino Uno - KT979

SKU KT979

The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin.

₹1648.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

KIT INCLUDES:

CMOS Ov7670 camera -1

Arduino uno with USB Cable – 1

Bread board 840 point - 1

Jumper wire male to female- 40 pieces

Jumper wire male to male- 40 pieces

Resistance 10 k ohm- 2 piece

Resistance 7 k ohm - 2 piece

The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin. With proper configuration to the camera internal registers via I2C bus, then the camera supply pixel clock (PCLK) and camera data back to the host with synchronize signal like HREF and VSYNC. The OV7670 camera module is a low cost 0.3 mega pixel CMOS color camera module, it can output 640x480 VGA resolution image at 30fps. The OV7670 camera module build in onboard LDO regulator only single 3.3V power needed and can be used in Arduino, STM32,Chipkit, ARM, DSP , FPGA and etc. HARDWARE REQUIRED

CMOS Ov7670 camera -1

Arduino uno with USB Cable – 1

Bread board 840 point - 1

Jumper wire male to female- 40 pieces

Jumper wire male to male- 40 pieces

Resistance 10 k ohm- 2 piece

Resistance 7 k ohm - 2 piece

SOFTWARE REQUIRED

Arduino IDE

Arduino IDE 1.8.5 (programmable platform for Arduino) Click To Download:https://www.arduino.cc/en/Main/Software

Code Click to see the code or copy the link. https://drive.google.com/open?id=1jw0vFKKPVtBTvKHk42uYc0OuB1QG08xi

Output Software

https://www.youtube.com/redirect?event=video_description&redir_token=Z3dKJKcTZwn8QSThRxpKw9-aIkN8MTUxMjMwNTYyOEAxNTEyMjE5MjI4&q=https%3A%2F%2Fcesarab.blob.core.windows.net%2Fpublic%2FReadSerialPortWin.exe&v=8V-XBA2qAKY

.net 3.5 framework

SPECIFICATIONS

CMOS OV7670 Camera

Array Element:640X480

IO Voltage: 1.7V to 3.0V

Power operation: 60mW/15fpsVGAYUV

Sleep:<20μA

Operating Temperature: -30 ℃ to 70 ℃

Stable: 0 ℃ to 50 ℃

Output Formats (8): YUV/YCbCr4: 2:2, RGB565/555, GRB4: 2:2, Raw RGB Data

Lens size: 1/6 "

Chief ray angle: 24 °

Maximum image transfer rate: 30fps VGA

Sensitivity: 1.3V / (Lux-sec)

SNR: 40 dB

Dynamic range: 52 dB

Scan Mode: Progressive

Electronic Exposure: 1 line to 510 line

Pixel Size: 3.6μm x 3.6μm

Dark current: 12 mV / s at 60 ℃

Features

High sensitivity suitable for low light operation

Low voltage suitable for embedded applications

Standard SCCB interface compatible with I2C interface

Supports VGA, CIF, and from a variety of sizes CIF to 40x30

VarioPixel sub-sampling mode

ISP has a compensation function to eliminate noise and dead pixels

Support for image scaling

Compensation for loss of optical lens

50/60Hz automatic detection

Saturation automatically adjust (UV adjustment)

Automatically adjust edge enhancement

Automatically adjust the noise reduction

Automatically affect the control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness

PROCESS

CMOS OV7670 Camera

Step -1

Step-2 Download the following from the link description:

Code.

Output software.

.net v3.5

Step -3

Copy the code into your Arduino ide.

Choose the com port from the board.

Remember the com port.

Upload your code.

Step -4

Run the output software exe

Choose your com port --> click start Probably something similar is what you would be seeing.

Troubleshooting

If not the exact image you expected, then you might want to trouble shoot, Case 1: if you are not able to open the output software- Check for the .net 3.5 installation. Case 2. If you are having issues with viewing images or not responding software Check for the wirings 9/10 people go wrong here.

Case

Simply adjust the screw of your camera lens and view different images till they seems to be clear

High sensitivity suitable for low light operation

Low voltage suitable for embedded applications

Standard SCCB interface compatible with I2C interface

Supports VGA, CIF, and from a variety of sizes CIF to 40x30

VarioPixel sub-sampling mode

ISP has a compensation function to eliminate noise and dead pixels

Support for image scaling

Compensation for loss of optical lens

50/60Hz automatic detection

Saturation automatically adjust (UV adjustment)

Automatically adjust edge enhancement

Automatically adjust the noise reduction

Automatically affect the control functions include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness

More in Arduino Boards

You might also need