About this product
Model: MCP2551
Material: Metal and plastic
Input Voltage: 7V
Operating Temperature: -40 to 125°C
Description:
The CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module is a high speed CAN, with fault-tolerant capabilities. It acts as an interfacing device between CAN protocol and the physical bus. The device, MCP2551 provides differential transmit and receive capabilities and is compliant with the ISO-11898, including the 24V requirements. Data transfer rate of up to 1Mb/s is achievable with this module.
The module also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources like EMI, ESD, electrical transients, etc.
Specification:
Model: MCP2551
Material: Metal and plastic
Input Voltage: 7V
Operating Temperature: -40 to 125°C
Storage Condition: -55 to 150°C
Features:
Supports 1 Mb/s operation
Implements ISO-11898 standard physical layer requirements
Suitable for 12V and 24V systems
The externally-controlled slope for reduced RFI emissions
Detection of ground fault (permanent dominant) on TXD input
Power-on Reset and voltage brown-out protection
An unpowered node or brown-out event will not disturb the CAN bus
Low current standby operation
Protection against damage due to short-circuit conditions (positive or negative battery voltage)
Protection against high-voltage transients
Automatic thermal shutdown protection
Up to 112 nodes can be connected
High-noise immunity due to differential bus implementation
Temperature ranges:
– Industrial (I): -40°C to +85°C
– Extended (E): -40°C to +125°C
Pin Description:
Pin Number
Pin Name
Pin Function
1
TXD
Transfer Data Input
2
VSS
Ground
3
VDD
Supply Voltage
4
RXD
Receive Data Output
5
VREF
Reference Output Voltage
6
CANL
CAN Low-Level Voltage I/O
7
CANH
CAN High-Level Voltage I/O
8
RS
Slope-control Input
Package Included:
1 x CJMCU-2551 MCP2551 CAN Protocol Controller High-speed Interface Module
Supports 1 Mb/s operation
Implements ISO-11898 standard physical layer requirements
Suitable for 12V and 24V systems
The externally-controlled slope for reduced RFI emissions
Detection of ground fault (permanent dominant) on TXD input
Power-on Reset and voltage brown-out protection
An unpowered node or brown-out event will not disturb the CAN bus
Low current standby operation
Protection against damage due to short-circuit conditions (positive or negative battery voltage)
Protection against high-voltage transients
Automatic thermal shutdown protection
Up to 112 nodes can be connected
High-noise immunity due to differential bus implementation
Temperature ranges:
– Industrial (I): -40°C to +85°C
– Extended (E): -40°C to +125°C