About this product
Description:
Power your DIY projects and battery-powered devices with ease using the TP4056 1A LiPo Battery Charger Module. Designed for single-cell 3.7V Li-ion or LiPo batteries, this compact module delivers safe, efficient, and fast charging at up to 1 Amp via a Micro USB input.
Built around the TP4056 lithium battery charging IC, this module features smart charging technology using the CC/CV (Constant Current/Constant Voltage) method. The built-in LED indicators provide real-time charging status – red for charging and blue for fully charged.
The module also includes optional protection circuitry (depending on version) that guards against overcharge, over-discharge, and short circuits, making it ideal for embedded electronics, IoT, power banks, wearables, and other low-power applications.
Specifications:
Charging IC: TP4056
Input Voltage: 4.5V – 5.5V (Recommended 5V via Micro USB)
Charging Current:1A max (adjustable via onboard resistor)
Battery Type: Single cell 3.7V Li-ion / LiPo battery
Charging Method: CC/CV (Constant Current / Constant Voltage)
Charge Voltage: 4.2V ± 1%
Input Interface: Micro USB (female) & solder pads for 5V IN
Protection: IC DW01 + FS8205A (in protection version only)
Overcharge Protection: 4.28V ± 1% (protection version)
Over-discharge: Protection 2.5V ± 1% (protection version)
Overcurrent Protection: 3A (typical, protection version)
LED Indicators: Red: Charging, Blue: Full charge
Operating Temperature: 10°C to +85°C
PCB Dimensions: Approx. 25mm x 19mm x 3mm (L x W x H)
Mounting Type: SMD/Through-hole (via solder pads)
Weight: 2g
Features:
⚡ 1A Fast Charging: Quick and reliable charging for 3.7V Li-ion/LiPo cells
🔌 Micro USB Input: Easy connectivity with standard USB cables
🔋 Smart Charging IC (TP4056): Automatic charging control using CC/CV algorithm
🛡️ Optional Built-in Protection: Overcharge, over-discharge, and short-circuit safety (protection version only)
🔴🔵 LED Indicators: Red = Charging, Blue = Fully Charged
🧰 Compact Design: Fits easily into DIY and portable electronic projects
♻️ Auto Recharge: Automatically resumes charging when battery voltage drops
Applications:
DIY electronics projects
Power banks
IoT devices
Bluetooth/wireless gadgets
Wearable tech
Solar battery charging systems
📌 Note:
Ensure you're using a compatible single-cell 3.7V Li-ion/LiPo battery. Avoid using without protection if safety is a concern. For best results, use a 5V USB power supply rated at 1A or higher.
How to Use:
Connect a micro USB cable for power, or a 5V DC to pads marked IN+ and IN- on the left-hand side of the module
Connect the cell to the charge to the B+/B- pads on the right-hand side of the module.
A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
Important! Disconnect the load when charging
The red LED indicates charging in progress, green LED indicates charging has finished.
Never charge your battery at a rate greater than 1C.
Package Included:
1 x TP4056 1A LiPo Battery Charger Module
⚡ 1A Fast Charging: Quick and reliable charging for 3.7V Li-ion/LiPo cells
🔌 Micro USB Input: Easy connectivity with standard USB cables
🔋 Smart Charging IC (TP4056): Automatic charging control using CC/CV algorithm
🛡️ Optional Built-in Protection: Overcharge, over-discharge, and short-circuit safety (protection version only)
🔴🔵 LED Indicators: Red = Charging, Blue = Fully Charged
🧰 Compact Design: Fits easily into DIY and portable electronic projects
♻️ Auto Recharge: Automatically resumes charging when battery voltage drops