CH341A USB EEPROM and SPI Flash Programmer 24/25 Series - RS3234

SKU RS3234/AA182/NA260

CH341A USB memory programmer for 24xx and 25xx chips This compact USB-A programmer is intended for reading, backing up, erasing and writing supported serial memory chips using

₹313.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

CH341A USB memory programmer for 24xx and 25xx chips This compact USB-A programmer is intended for reading, backing up, erasing and writing supported serial memory chips using suitable computer software. It is useful on an electronics repair bench for compatible BIOS flash, router firmware memory and I2C EEPROM work. It is not a universal BIOS recovery tool or a general-purpose microcontroller programmer. Important voltage check before use Some black CH341A board revisions supply about 3.3V to the memory socket while driving data signals close to 5V. That can damage a 3.3V-only chip. Other revisions differ: a black PCB, regulator or printed 3.3V label does not establish safe logic levels. Before connecting a target, have a qualified person check both the socket supply and signal levels against the exact memory chip's datasheet. Do not assume this unit is a verified level-shifted revision. A 1.8V memory chip needs a suitable adapter that handles both supply voltage and logic-level conversion; it must not be connected directly. Do not connect this programmer to a powered target board. Hardware and compatibility

USB-A connection for computer power and data.

CH341A-marked USB interface chip and lever-operated ZIF socket.

Separate socket placement markings for 25-series SPI and 24-series I2C memory.

Breakout headers and a small green surface-mount adapter PCB are shown in the photos.

Support depends on the complete chip part number, voltage, package, programmer revision and software chip database. Read, erase and write support can differ. Select the exact device rather than relying only on an automatic identification result. A physically fitting package does not prove electrical or software compatibility. For compatible SPI flash, flashrom supports the ch341a_spi programmer interface. I2C EEPROM work needs software with explicit support for that memory family. Drivers vary by application and operating system. Use maintained software from its publisher; no universal operating-system, all-STC or all-24/25-chip support is promised. Backup-first workflow

Identify the memory chip and confirm voltage, software support, socket zone and pin-1 orientation before inserting it with USB unplugged.

After the electrical checks, read the original memory more than once, save separate files and compare them. Investigate differing or implausible data before proceeding.

Keep the original backup safe. Write only an image verified for the exact target, then run the software's verification step.

In-circuit clips are not a guaranteed substitute for removing a chip: surrounding circuitry can interfere or be back-powered. Stop if reliable reads cannot be obtained. Firmware writes can leave equipment unusable. Package 1 x CH341A USB programmer. The gallery shows a small adapter PCB and loose header pins; confirm these accessories with the supplied pack. A test clip, 1.8V adapter, memory chip and computer are not included.

More in Development Boards

You might also need