About this product
Description:
The CC Debugger is a compact and versatile programmer/debugger designed for Texas Instruments Low-Power RF System-on-Chips. It supports firmware debugging through IAR Embedded Workbench for 8051 (version 7.51A or later) and enables reliable flash programming using TI’s SmartRF Flash Programmer. In addition, the CC Debugger can interface with SmartRF Studio to control and evaluate supported RF devices, making it an essential tool for development, testing, and configuration of TI RF solutions.
Specifications:
Item Type: Debugger, Programmer
Voltage Rating: 1.2 to 3.6V
Minimum Target Voltage: 1.2V
Maximum Target Voltage: 3.6V
Operating Temperature: 0°C to 85°C
Voltage Range: 3.3V, Regulated CC Debugger
Maximum Target Current: 200mA
Supported: Windows 7, Windows 8, Windows XP SP2/SP3, Windows 2000
Features:
CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545.
It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
Package Included:
1 x CC Debugger
1 x USB cable
1 x 10Pins flat cable
CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545.
It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531