About this product
Description:
Bala2-Fire is a balancing car application. This product is a self-balancing robot composed of M5Stack Fire and the BALA2 motor base. The base uses STM32F030C8T6 as the main controller and is powered by dual N20 encoder geared motors. It has a built-in 1200mAh battery. The name "BALA" comes from the abbreviation of the word "Balance", and this is currently the second-generation product.
The BALA2 Fire base includes rich interfaces. In addition to the standard PortB and PortC, it also supports 8 servo channels, of which 4 channels can be connected directly, and the remaining 4 channels need to be extended from inside the base. You can control it to move freely through programming, or develop remote control functions via WiFi. Even if you have never worked with balancing car programs before, you can quickly complete programming and control it through UiFlow.
By default, the balancing car application is pre-installed at the factory. During operation, it uses a PID closed-loop algorithm to maintain vertical balance, and uses accelerometer and gyroscope attitude data to correct its direction and position.
Specifications:
Base MCU: STM32F030C8T6
ESP32: 240MHz Dual Core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash: 16MB Flash
PSRAM: 8MB
LCD: 2-inch, 320x240 Color TFT LCD, ILI9342C
Speaker: 1W -0928
MEMS: MPU6886
Motor: Driver Model: HR8833
Gear Ratio: 1:30
No-load Speed: 530rpm
Rated Speed: 300rpm
Rated Current: ≤0.17A
Interface: GROVE I2C x 1 / UART x 1 / GPIO x 1 / SERVO x 4 (+4 Extendable Channel)
Battery: 1200mAh
Case Material: Plastic
Features:
6-axis attitude sensor
Dual-wheel drive with PID balance control
Grove expansion interfaces (PORTB / PORTC)
8-channel servo drive, 4 external and 4 internal
WiFi supported, programmable
Built-in speaker
microSD expansion supported
LEGO compatible
I2C communication: 0x3A
Development Platform
MicroPython
UiFlow
Arduino
Package Included:
1 x M5Stack BALA2 FIRE Self-Balancing Robot Kit
4 x Wheel connector
2 x HY2.0-4P Cables 20cm
2 x Bricks
1 x HEX KEY
1 x Type-C USB cable, 120cm
6-axis attitude sensor
Dual-wheel drive with PID balance control
Grove expansion interfaces (PORTB / PORTC)
8-channel servo drive, 4 external and 4 internal
WiFi supported, programmable
Built-in speaker
microSD expansion supported
LEGO compatible
I2C communication: 0x3A
Development Platform
MicroPython
UiFlow
Arduino