10000mAh Lipo Battery 22.2V 10000mAh 3S Lithium Polymer Battery - RS4972
The 10000mAh Lipo Battery is a low-cost lithium polymer battery with a high power density that provides high performance with great reliability.
₹7670.00 GST added at checkout
SKU ER006
B3 Compact Balance Charger for 2S and 3S LiPo Packs This compact mains-powered B3 charger is intended for standard 2S 7.4V and 3S 11.1V lithium-polymer battery packs with a
₹418.50
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
B3 Compact Balance Charger for 2S and 3S LiPo Packs This compact mains-powered B3 charger is intended for standard 2S 7.4V and 3S 11.1V lithium-polymer battery packs with a matching balance connector. Separate 2S and 3S sockets and three cell-status LEDs make the connection and charging state visible without a menu or display. Check the charger and pack first
Battery type: standard LiPo, 2S or 3S only.
Nominal pack voltage: 7.4V for 2S; 11.1V for 3S.
Two separate balance-port sizes for the supported cell counts.
Photographed label: AC 100-240V input and 800mA maximum charging current.
Black ventilated housing with a detachable two-pin mains lead.
Check the rating on the supplied unit and the battery maker's permitted charge rate before use. B3-labelled chargers are sold in different versions; do not treat another model's power or current figure as this unit's rating. Do not use this charger for LiHV, LiFe, NiMH, lead-acid, single-cell or higher-cell-count packs. Connection and status checks Read the supplied instructions and inspect the charger, mains lead and battery for damage. Connect the charger to a suitable mains outlet first and check its normal startup indication. Then connect one compatible battery to the port that matches its cell count, following the connector keying and polarity. Do not force a connector, use both charge ports together or improvise an adapter with unverified pin order. On the usual B3 indicator scheme, red means a cell is charging and green means that cell has finished. Follow the supplied unit's instructions, and check the indicators for every connected cell before disconnecting the pack. LEDs are status indicators, not proof that a damaged battery is safe. Charging precautions Charge only under continuous adult supervision on a non-flammable surface away from combustible material. Keep the unit dry and ventilated. Never charge a swollen, punctured, overheated or otherwise damaged pack. Stop use if there is unusual heat, smell, noise or an unexpected indication, and follow the battery maker's safety instructions. Disconnect the battery and unplug the charger when finished. Do not open the mains-powered housing. Package contents 1 x B3 compact balance charger and 1 x two-pin EU-style mains cable. A suitable locally compliant adapter may be needed for the socket in use. Battery and plug adapter are not included. SKU: ER006.
More in LiPo Batteries
The 10000mAh Lipo Battery is a low-cost lithium polymer battery with a high power density that provides high performance with great reliability.
₹7670.00 GST added at checkout
The 10000mAh Lipo Battery is a low-cost lithium polymer battery with a high power density that provides high performance with great reliability.
₹13200.00 GST added at checkout
1050mAh Lipo Battery 3.7V Li-Po Battery 1050mAh 25C Info The model is an ideal Li-po for your aircraft, car, and various robots.
₹1498.50 GST added at checkout
Rated Voltage of 18650 or 3.7V Lithium Battery: 11.1V After the lithium battery is fully charged, the voltage is 12.6V This 3 cell lithium ion battery protection board is equipped
₹240.00 GST added at checkout