AS-10-220 AC 220V Dusk-to-Dawn Photocell Light Switch - RS5915

SKU RS5915

AS-10-220 AC Photocell Switch for Dusk-to-Dawn Lighting The AS-10-220 switches a connected lamp according to ambient light: on when it becomes dark and off when daylight returns.

₹148.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

AS-10-220 AC Photocell Switch for Dusk-to-Dawn Lighting

The AS-10-220 switches a connected lamp according to ambient light: on when it becomes dark and off when daylight returns. This is the AC 220V version shown on the product label, not a 12V DC sensor for batteries, cars or solar-lamp circuits. The blue-and-white housing has three wire leads and a metal mounting bracket.

Check the version and lighting load

Model marking: AS-10-220.

Photographed supply label: AC 220V.

Photographed switching-current marking: 10A.

Three labelled lead functions: line, neutral and switched load.

Light-sensing housing with a mounting bracket.

The 10A marking is not a promise that every lamp or LED driver can be switched at 10A. LED drivers, fluorescent fittings and other reactive loads can draw substantial starting current. Have the installer check the actual load type, inrush current and the supplied unit's rating, and use an appropriately rated contactor where required. Do not assume a universal 2200W lighting capacity.

Installation and sensor placement

This is a mains-voltage device, not an Arduino or Raspberry Pi input module. Installation, testing and servicing should be done by a qualified electrician with the circuit isolated and verified dead. Follow the supplied unit's wiring label and local electrical rules; do not rely on wire colour alone. Keep connections in a suitable protected enclosure with proper insulation, strain relief and circuit protection.

Place the sensor where it can see natural daylight, away from deep daytime shade and the light produced by the lamp it controls. Light feeding back from that lamp can cause repeated switching. Choose a location and weather protection suitable for the actual unit; no IP rating or immersion protection is claimed here.

Operation and package contents

Allow the unit's own switching delay during a daylight/darkness check. Exact delay and light thresholds depend on the supplied version and are not specified here. If the lamp cycles or does not switch as expected, isolate the circuit and have the installer check placement, wiring and load compatibility.

Includes 1 x AS-10-220 photocell switch with the bracket and leads shown. Lamp, supply wiring, protective enclosure and contactor are not included. SKU: RS5915.

More in Sensor Modules

You might also need