1 Meter DC Jack Power Cable Male Plug Connector Wire for CCTV, LED & DIY Projects - RS9662
The DC Jack Power Cable 1M is a high-quality, reliable solution for powering your low-voltage electronic devices.
₹163.50 GST added at checkout
SKU RS7285
This Arducam ToF Camera Module is a Time of Flight (ToF) camera module from Arducam. It features a MIPI-CSI 2 connection and offers up to a 4-meter measuring range with sub-2cm
₹9098.70
18% GST added at checkout
In stock
₹150 flat shipping, free over ₹3000
Buying for a school or in bulk? Ask us for institutional pricing. Get a quote
Description:
This Arducam ToF Camera Module is a Time of Flight (ToF) camera module from Arducam. It features a MIPI-CSI 2 connection and offers up to a 4-meter measuring range with sub-2cm precision. It was designed and optimized exclusively forRaspberry PiNvidia Jetsonboards.
Specifications:
Item Type: ToF Camera
Resolution: 240×180
Image Size: 1/6″
Max. Frame Rate (sensor): 120fps
Raspberry Pi OS: Bullseye (32-bit/64-bit) 01/28/22 or later releases
TDP: 3.5W Power supply for Pi should be at least 5V/4A
Modulation frequency: 75MHz/37.5MHz
View angle: 70° Diagonal
Measurement Distance (m): Far Mode: 4m Near Mode: 2m
Light Source: 940nm VCSEL illuminator
Interface: MIPI (2-Lane)
Output Format: 4-phase RAW Frame, Depth Frame, Grayscale Amplitude Frame
Features:
From 2D to 3D, It’s Fully Customizable
2M or 4M, With Cable Extension
Making 3D Imaging Easier and Affordable
How Time of Flight (ToF) Works:
A ToF Camera emits modulated lights (CW method) and uses the time it takes for the said lights to be reflected back to measure the distance/depth info of any given object/scene, and you can obtain depth data (X, Y Z coordinate position) in every pixel.
Light travel is calculated withd=C/2f, where C is the speed of light and f is the modulation frequency.
Package Included:
1 xArducam ToF Camera Module Arducam ToF Camera For Raspberry Pi 2D to 3D, Fully Customizable Camera For Raspberry Pi Arducam ToF Camera For Real-Time Depth Mapping on Raspberry Pi
From 2D to 3D, It’s Fully Customizable
2M or 4M, With Cable Extension
Making 3D Imaging Easier and Affordable
| Item Type | ToF Camera |
|---|---|
| Resolution | 240×180 |
| Image Size | 1/6″ |
| Max. Frame Rate (sensor) | 120fps |
| Raspberry Pi OS | Bullseye (32-bit/64-bit) 01/28/22 or later releases |
| TDP | 3.5W Power supply for Pi should be at least 5V/4A |
| Modulation frequency | 75MHz/37.5MHz |
| View angle | 70° Diagonal |
| Measurement Distance (m) | Far Mode: 4m Near Mode: 2m |
| Light Source | 940nm VCSEL illuminator |
| Interface | MIPI (2-Lane) |
| Output Format | 4-phase RAW Frame, Depth Frame, Grayscale Amplitude Frame |
More in Cameras
The DC Jack Power Cable 1M is a high-quality, reliable solution for powering your low-voltage electronic devices.
₹163.50 GST added at checkout
This 1000TVL 90 Degree COMS Camera can be used as both PAL and NTSC. The toggle switch is provided on the camera by which you can enjoy the operation of PAL or NTSC mode.
₹1198.50 GST added at checkout
₹9490.00 GST added at checkout
Support up to 64GB SD Card Support recording and charging at the same time Support Micro SD/TF Card as External Memory,max to 64Gb
₹3298.50 GST added at checkout