About this product
GT2 20 Tooth Aluminum Idler Pulley - 5mm Bore
This toothed idler pulley guides a 6mm-wide GT2 timing belt around a fixed mounting point. It has 20 teeth and a 5mm bearing bore, making it useful for belt routing and tensioner assemblies in 3D printers, CNC projects and small automation systems.
An idler is different from a motor drive pulley. Its bearing lets the outer pulley rotate freely while the mounting bolt or shaft stays fixed. Choose this toothed version where the toothed face of a matching GT2 belt runs against the pulley. It is not a grub-screw drive pulley for locking onto a motor shaft.
Specifications
Type: passive toothed idler pulley
Tooth profile: GT2 / 2GT
Tooth count: 20
Belt pitch: 2mm
Compatible belt width: 6mm
Center bearing bore: 5mm
Pulley material: aluminum
Choosing and fitting the pulley
Confirm the belt profile, belt width and mounting diameter before fitting. Align the pulley with the belt path and leave enough clearance for the flanges to turn without rubbing the bracket. Support the bearing correctly so tightening the mounting hardware does not stop the pulley rotating freely. Apply only the belt tension recommended for your mechanism.
Common uses include return pulleys, adjustable belt tensioners and direction changes in linear motion systems. Mounting brackets and hardware depend on the machine design and are not included.
Package contents
1 x GT2 20 tooth aluminum idler pulley with 5mm bore. Belt, mounting bolt and other machine parts are not included.