Ai-Thinker

Ai-Thinker VC-02-Kit Offline Voice Recognition Development Board - RS9979

SKU RS9979

The RS9979 is a VC-02-based development board for adding local voice-command control to embedded projects. The product photos show the VC-01/02-Kit carrier with a VC-02 module

₹838.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Ai-Thinker VC-02-Kit Offline Voice Recognition Board

The RS9979 is a VC-02-based development board for adding local voice-command control to embedded projects. The product photos show the VC-01/02-Kit carrier with a VC-02 module, microphone and speaker. Speech recognition runs locally rather than requiring a cloud connection during normal recognition.

This is a programmable command-recognition platform, not a general-purpose conversational assistant. The recognised commands, wake words, responses, language and output behaviour depend on the firmware loaded on the board. Verify the supplied firmware before planning a specific command set or language.

Board and module specifications

Development-board model: VC-02-Kit, using the VC-02 module.

Processor: 32-bit RISC core, up to 240MHz.

Memory: 242KB SRAM and 2MB flash.

Board supply: 5V DC. Use a supply capable of more than 500mA, as specified for the kit; 500mA is not a fixed operating-current claim.

Interfaces include UART, I2C, PWM and GPIO, subject to firmware and pin configuration.

The kit has a USB-to-serial interface for development and firmware work.

Connecting to a host controller

For UART communication, connect the board's TX1 signal to the host's RX and RX1 to the host's TX, with a suitable common ground. Confirm the signal levels, baud rate and firmware protocol before wiring. The 5V board supply does not mean every I/O pin tolerates 5V. Use level conversion where the host and board signal levels do not match.

The kit labels distinguish the SCL/SDA interface from SCL_5V/SDA_5V. The manufacturer's kit specification says the 3.3V and 5V I2C ports cannot be used simultaneously. Do not confuse 3V3OUT with a power-input pin. Follow the actual board labels and the kit manual, not the bare-module pin numbering.

Firmware and audio notes

Use firmware and update instructions made for the VC-02 and the exact board revision. A host such as Arduino, ESP32 or STM32 needs suitable serial code and electrical compatibility; it is not a universal plug-and-play connection. DAC_L and DAC_R are listed as reserved and not supported in the kit specification, so they should not be treated as ready-to-use stereo line outputs.

Connect the microphone and speaker only to their intended connectors, with power disconnected. Verify the speaker requirement and connector polarity before substitution. Speech results depend on microphone position, background noise, pronunciation and the configured commands.

Package includes

1 x VC-02 voice-recognition development-board set with the microphone and speaker shown in the product photos. Host controller, power supply and programming accessories are not included unless separately stated.

More in Development Boards

You might also need