Ai-Thinker

Ai-Thinker RTLDUINO-BW16 WiFi Kit RTLDUINO-BW16 WiFi Development Board BW16 WiFi Kit For Compatible With Arduino Development With Type-C Interface - RS5720

SKU RS5720

BW16 is a dual-frequency Wi-Fi Bluetooth SoC module based on RTL8720DN. BW16 supports dual-frequency (2.4ghz or 5ghz) WLAN and low-power Bluetooth5.0 it integrates ARM V8

₹2548.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

Description:

BW16 is a dual-frequency Wi-Fi Bluetooth SoC module based on RTL8720DN. BW16 supports dual-frequency (2.4ghz or 5ghz) WLAN and low-power Bluetooth5.0 it integrates ARM V8 (compatible with Cortex-M4F) high-performance MCU, ARMV8M(compatible with Cortex-M0) low-power MCU, WLAN(802.11 a / b / g / n),MAC, Bluetooth baseband and RF baseband) and provides a set of configurable GPIO ports for the control of different peripherals. BW16 integrates internal memory, supports some simple application development, and realizes complete Wi-Fi and BT 5.0 protocol functions.

Specifications:

Model: BW16

Antenna: PCB or IPEX antenna

Frequency Range: 2400-2483.5MHz or 5180-5825MHz

Bluetooth: BT5.0

Bluetooth Frequency Range: 2.402GHz - 2.480GHz

Operating Temperature: -20℃ ~ 70℃

Storage Environment: -40℃ ~ 125℃ , < 90%RH

Power Supply: Voltage 3.0V ~ 3.6V, Typ:3.3V, current >450mA

Interface: UART/GPIO/ADC/PWM/IIC/SPI/SWD

FLASH: Default 16Mbit (Support 16Mbit/32Mbit/64Mibt/128Mbit)

Features:

Support 802.11a/b/g/n 1x1, 2.4GHz or 5GHz.

Support HT20/HT40 mode

Support for low-power beacon listening mode, low-power reception mode, and low-power pending mode.

Embedded AES / DES / SHA hardware engine.

Support TrustZone-M and Safed start-up.

Support SWD debug port access protection

Support BLE and BT5.0

Bluetooth supports high power mode (7dBm, sharing the same PA with WiFi)

Wi-Fi and BT share the same antenna

Support STA/AP/STA+AP operating mode

Support the Smart Config(APP)/AirKiss(wechat) of Android, IOS (One-click distribution network

Support serial port local upgrade and remote firmware upgrade(FOTA)

Pin Description:

Pin No. Name Description

1

2

GND

PA30

Ground

LP_PWMI

3 PA27 SWD_DATA

4 PA25 LP_I2C-SCL/LP_PWM4

5 PA26 LP_I2C-SDA/LP_PWM5

6 PA8_LOG_RX0 UART_LOG_RDX

7 PA7_LOG_TX0 UART_LOG_TDX

8 EN Chip Anable Terminal

9

10

GND

3V3

Ground

3.3V Power Supply

11 5V 5V Power Supply

12

13

5V

3V3

5V Power Supply

3.3V Power Supply

14 GND Ground

15

16

PB1_TX1

PB2_RX1

LP_UART_TXD

LP_UART_RXD

17

PB3 ADC/SWD_CLK

18

19

PA12

PA13

LP_PWM0/SPI1_MOSI

LP_PWM1/SPI1_MOSO

20

PA14 SPI1_CLK

21

22

PA15

GND

SPI1_CS

Ground

Package Included:

1 x Ai-Thinker BW16-Kit WiFi Development Board

Support 802.11a/b/g/n 1x1, 2.4GHz or 5GHz.

Support HT20/HT40 mode

Support for low-power beacon listening mode, low-power reception mode, and low-power pending mode.

Embedded AES / DES / SHA hardware engine.

Support TrustZone-M and Safed start-up.

Support SWD debug port access protection

Support BLE and BT5.0

Bluetooth supports high power mode (7dBm, sharing the same PA with WiFi)

Wi-Fi and BT share the same antenna

Support STA/AP/STA+AP operating mode

Support the Smart Config(APP)/AirKiss(wechat) of Android, IOS (One-click distribution network

Support serial port local upgrade and remote firmware upgrade(FOTA)

Specifications

ModelBW16
AntennaPCB or IPEX antenna
Frequency Range2400-2483.5MHz or 5180-5825MHz
BluetoothBT5.0
Bluetooth Frequency Range2.402GHz - 2.480GHz
Operating Temperature-20℃ ~ 70℃
Storage Environment-40℃ ~ 125℃ , < 90%RH
Power SupplyVoltage 3.0V ~ 3.6V, Typ:3.3V, current >450mA
InterfaceUART/GPIO/ADC/PWM/IIC/SPI/SWD
FLASHDefault 16Mbit (Support 16Mbit/32Mbit/64Mibt/128Mbit)

More in Development Boards

You might also need