About this product
ESP-07 ESP8266 Serial WiFi Module
Integrate 2.4GHz WiFi into a custom PCB or embedded prototype with this Ai-Thinker ESP-07 module. The shielded ESP8266 module has castellated edge connections, an onboard ceramic antenna and an IPEX antenna connector. It is a surface-mount module rather than a USB development board, so the surrounding power, programming and boot-mode circuitry must be provided by your design.
Key features
ESP8266-based 802.11 b/g/n WiFi on the 2.4GHz band.
SMD-16 module format, approximately 21.2 x 16 x 3mm.
UART, GPIO, ADC and PWM connections for embedded applications.
Built-in ceramic antenna and IPEX connection for an appropriate external antenna arrangement.
Station, access-point and combined operation with compatible firmware.
Suitable for sensor nodes, serial WiFi links and connected-control prototypes.
Electrical integration
Use a regulated 3.3V supply. Ai-Thinker specifies a 3.0-3.6V supply range and a supply-current capability greater than 300mA. Do not apply 5V directly to the module's supply or I/O. Provide local decoupling, check boot-strap pins and respect the antenna keep-out area in the PCB layout.
Before programming
The module has no onboard USB-to-serial adapter. Use a suitable 3.3V UART programmer and the correct reset/boot sequence to load firmware. AT commands require compatible AT firmware; they are not a separate hardware interface. Check the supplied unit's flash capacity and firmware before choosing a software image. An external antenna is not included, and antenna routing should follow the module design rather than assuming both antenna options operate at once.
Package contents
1 x Ai-Thinker ESP-07 ESP8266 WiFi module
ESP8266-based 802.11 b/g/n WiFi on the 2.4GHz band.
SMD-16 module format, approximately 21.2 x 16 x 3mm.
UART, GPIO, ADC and PWM connections for embedded applications.
Built-in ceramic antenna and IPEX connection for an appropriate external antenna arrangement.
Station, access-point and combined operation with compatible firmware.
Suitable for sensor nodes, serial WiFi links and connected-control prototypes.