About this product
Description :
The 7809 Voltage Regulator IC is a 3-terminal linear voltage regulator that provides a fixed 9V DC output from higher DC input voltages (typically 11V–35V). This IC can supply up to 1A of continuous current and is designed with built-in protection features for overload, short-circuit, and thermal shutdown — ensuring safe and reliable performance in a wide range of electronic, Arduino, and DIY applications.
🧠 Universal Compatibility:
This IC is pin-to-pin compatible with multiple manufacturer variants:
L7812CV (STMicroelectronics)
KA7812 (ON Semiconductor / Fairchild)
MC7812 (Motorola / ON Semiconductor)
LM7812 (Texas Instruments)
All share identical electrical specifications and pin configurations.
Specifications:
Parameter
Specification
Notes
Output Voltage
+9V DC ±4%
Fixed output
Output Current
1A max
With adequate heatsinking
Input Voltage Range
11V to 35V DC
For proper regulation
Dropout Voltage
2V typical
Input must exceed output by ≥2V
Line Regulation
3mV typical
Consistent output vs input
Load Regulation
12mV typical
Consistent output vs load
Ripple Rejection
60–70dB
Excellent noise filtering
Operating Temp
0°C to +125°C
Junction temperature
Package
TO-220
3-pin through-hole
Pins
Input, Ground, Output
Standard configuration
Features:
✅ Fixed +9V DC Output (±4%)
✅ Up to 1A Output Current
✅ Wide Input Range: 11V–35V DC
✅ TO-220 Package (easy to mount, heatsink compatible)
✅ Short-Circuit & Thermal Protection Built-In
✅ Low Ripple & Noise (perfect for analog & audio circuits)
✅ Stable Performance Under Varying Load Conditions
✅ 100% Compatible With: LM7809, KA7809, MC7809, UA7809
Pin Configuration:
Pin Number
Name
Function
1
Input (VIN)
Unregulated DC input (11V–35V)
2
Ground (GND)
Common ground
3
Output (VOUT)
Regulated +9V DC output
TAB
Ground
Connected internally to GND
🧩 Recommended Circuit:
Basic Connections:
Input Capacitor: 0.33µF (Ceramic or Electrolytic) between Input & GND
Output Capacitor: 0.1µF–1µF (Ceramic or Electrolytic) between Output & GND
Heatsink required for loads >500mA
Protection Diodes (Optional):
Input-Output Protection: 1N4007 (prevents reverse current)
Output-Ground Protection: 1N4007 (protects from reverse discharge)
🔋 Typical Applications:
🔹 Arduino & Microcontroller Boards:Provide a regulated 9V source from a 12V or 15V adapter for consistent logic operation.
🔹 Audio Amplifiers:Stable and noise-free power for preamp and op-amp stages.
🔹 Robotics & Automation Projects:Power small DC motors, servo drivers, and logic circuits.
🔹 Sensor & Analog Modules:Ensures stable reference voltage for sensors and analog ICs.
🔹 Battery Chargers:Used in 9V DC charging circuits and battery regulators.
🔹 Educational & DIY Electronics Kits:Commonly used in engineering labs and Atal Tinkering Labs (ATL).
🧱 Build Quality & Protections:
Protection
Description
Thermal Shutdown
Shuts down IC at ~150°C to prevent damage
Short-Circuit Protection
Limits current safely when output is shorted
Overload Protection
Maintains safe current limits
Reverse Polarity Protection
(With external diode) prevents accidental reverse connection
Package Included:
1 x 7809 9V Voltage regulator
✅ Fixed +9V DC Output (±4%)
✅ Up to 1A Output Current
✅ Wide Input Range: 11V–35V DC
✅ TO-220 Package (easy to mount, heatsink compatible)
✅ Short-Circuit & Thermal Protection Built-In
✅ Low Ripple & Noise (perfect for analog & audio circuits)
✅ Stable Performance Under Varying Load Conditions
✅ 100% Compatible With: LM7809, KA7809, MC7809, UA7809