About this product
Description:
This 3D Printer MKS OSC Stepper Motor Controller Pulse PWM Speed Reversing Module is a pulse generating module, which is used as a signal for stepper drivers. To control the stepper motor, it must be equipped with a driver. The module can be used as an Easy controller + stepper driver + stepper motor + DC power composed of a simple control platform. It consists of 3 kinds of frequency signals, including 5.4k-160khz, 540-16.6khz, 80-2.4khz, which can be chosen. Support generating a pulse and PWM signal, support skipping stitch choice. For frequency measurement there are two ports of PUL and common-cathode (or common anode) can be measured.
Specification:
Power Input: 8-24V
Frequency Signals: 5.4k-160khz,540-16.6khz,80-2.4khz
Features:
This module is a pulse generation module and supplies a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver.
This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform. (Only the controller is included.)
The controller has a total of 3 kinds of frequency signals: high 5.4k-160khz, medium 540-16.6khz, and low 80-2.4khz, which can be selected with a jumper.
It can generate pulse signal and PWM signal, and it can be selected by jumper.
Frequency measurement: You can measure PUL and common cathode (or common anode) two ports.
Different stepping motor driver different port sign, but same function-
EN=ENA=FREE Enable
PUL=PULS=CLK Pulse
DIR=CW=CWW Direction
Common anode connection (connect with B)-
EN+ PUL+ DIR+ all link together to a common anode port
EN- connect to EN
PUL- connect to CLK
DIR- connect to DIR
Common cathode connection (connect with B)-
EN- PUL- DIR- all link together to a common cathode port
EN+ connect to EN
PUL+ connect to CLK
DIR+ connect to DIR
Package Included:
1 x 3D Printer MKS OSC Stepper Motor Controller
This module is a pulse generation module and supplies a stepper driver as a signal. To control the stepper motor, it must be equipped with a driver.
This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform. (Only the controller is included.)
The controller has a total of 3 kinds of frequency signals: high 5.4k-160khz, medium 540-16.6khz, and low 80-2.4khz, which can be selected with a jumper.
It can generate pulse signal and PWM signal, and it can be selected by jumper.
Frequency measurement: You can measure PUL and common cathode (or common anode) two ports.