About this product
Description:
High-power, adjustable DC-DC buck converter module rated up to 300W / 20A. Wide input range and CC/CV operation make it ideal for LED drivers, lithium battery charging, bench supplies, and embedded power solutions.
Specifications:
Input Voltage: DC 6-40V (10V to 40V is suggested)
Output Voltage: DC 1.2-36V
Output Current: 20A(max.), 15A (suggested)
Efficiency: 97% (24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery (cannot short circuit for a long time)
Terminals: Large current screw terminals (30A rated on many modules) for IN/OUT connections.
Typical Size: PCB with heatsinks.
Features:
Wide input voltage: DC 6–40V (recommended 10–40V for best performance).
Adjustable output: 1.2–36V DC, settable via onboard potentiometer.
High current: 20A max output (manufacturers commonly advise ~15A continuous without extra cooling).
High efficiency: Up to 95–97% under favorable conditions (example: 24V → 12V tests).
Constant Current / Constant Voltage (CC/CV) operation for LED driving and battery charging.
Protection features: short-circuit / over-current protection (self-recovery), thermal protection recommended.
Robust construction: large MOSFETs and large screw terminals for high current wiring; often supplied with heat sinks.
Applications / Use Cases:
LED strip / high-power LED driver (use CC mode).
Lithium / Li-ion battery charging (use CC/CV with proper charge profile & safety interlocks).
Bench variable power supply for electronics testing.
Robotics, embedded systems, motor drivers (with proper filtering & cooling).
Usage & Safety Recommendations (important):
Set voltage with no load first. Always adjust to the desired voltage without a load connected, then set current limit before connecting the load.
Cooling: at high currents (>10–15A) use a large heatsink and forced airflow (fan). Continuous 20A operation without adequate cooling can overheat the module or reduce lifespan.
Wire gauge: use heavy gauge cables for input/output (rated for the expected current) and secure screw terminals tightly.
Protection: do not permanently short the output; module protection is self-recovering but repeated abuse will damage components.
Pin Description:
VO+: output positive
VO-: Negative output
+IN: Enter the positive polarity
-IN: Input the negative pole
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
Package Included:
1 x 300W DC-DC Buck Converter Power Module Output Adjustable 20A Max DC-DC 6-40V Step Down to 1.2-36V
Wide input voltage: DC 6–40V (recommended 10–40V for best performance).
Adjustable output: 1.2–36V DC, settable via onboard potentiometer.
High current: 20A max output (manufacturers commonly advise ~15A continuous without extra cooling).
High efficiency: Up to 95–97% under favorable conditions (example: 24V → 12V tests).
Constant Current / Constant Voltage (CC/CV) operation for LED driving and battery charging.
Protection features: short-circuit / over-current protection (self-recovery), thermal protection recommended.
Robust construction: large MOSFETs and large screw terminals for high current wiring; often supplied with heat sinks.