About this product
Operating Voltage: 2.0~2.5V
Operating Current: 10mA
Diameter: 3mm
Package Type: Diffusion
Color: Red And Green
Description:
This is 2 color led module. This module has two different colors- Red and Green. Use this module as an indicator where each color corresponds to a different value situation or as plugin to other electronics boards such as Arduino and Raspberry Pi.
Specification:
Operating Voltage
2.0v ~ 2.5v
Operating Current
10mA
Diameter
3mm
Package Type
Diffusion
Color
Red + Green
Beam Angle
150
Wavelength
571nm + 644nm
Luminosity Intensity (MCD)
20-40; 40-80
Connection Diagram:
We'll use a couple of 330Ω resistors to limit the current from the Arduino and prevent burning the LED.
KY-011
Breadboard
Arduino
G
330Ω resistor
Pin 10
R
330Ω resistor
Pin 11
Y
GND
Example Code:
The following Arduino sketch will gradually alternate between red and green color.
int redpin =11; // pin for red signal
int greenpin =10; // pin for green signal
int val;voidsetup(){pinMode(redpin,OUTPUT);pinMode(greenpin,OUTPUT);}voidloop(){for(val =255; val >0; val--){analogWrite(redpin, val); //dim red
analogWrite(greenpin,255- val); // brighten green
delay(15);}for(val =0; val <255; val++){analogWrite(redpin, val); //brighten red
analogWrite(greenpin,255- val); //dim green
delay(15);}}
How To Use:
Display different colors using Two Color Module Using a Server Application
Package Included:
1 x 2 color Led Module