About this product
Overcharge detection voltage: 3.9+ 0.05 V
Over charging voltage: 3.9+ 0.05 V
Over discharge voltage: 2.55±0.08
Overcharge detection delay time: 0.1s
Description:
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable, a Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides continuous discharge of 30A, Balanced current, for electric drill/sprayer/LED lights/low power inverter. (if the cooling environment is not good, please reduce the load current use). The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance). The Board comes in a size of approx. 46 x 60 x 3.4 mm which can be easily installed in a compact size or on battery bundle itself.
Specification:
Overcharge detection voltage
3.9+ 0.05 V
Over charging voltage
3.9+ 0.05 V
Over discharge voltage
2.55±0.08
Overcharge detection delay time
0.1s
Temperature range
-30-80 Degree Cel.
Short circuit detection delay time
100ms
Over current detection delay time
500 ms
Balanced current
60mA
Working current
30A
Over current
60A
Package Included:
1 x 14.8V 4S 30A 18650 Lithium Battery BMS PCB Integrated Circuits Protection Board PCB Cell Protection Board