100 RPM Single Shaft BO Rectangle Motor - MR018

SKU MR018

This is a 100 RPM low-cost single shaft DC geared motor. It is most suitable for lightweight robot requiring small power.

₹82.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

DESCRIPTION

This is a 100 RPM low-cost single shaft DC geared motor.

It is most suitable for lightweight robot requiring small power.

This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Drive shaft has a clutch for non-continuous protection from overload which protects gears from the sudden overload.

Motor runs smoothly from 2V to 12V and gives a wide range of RPM, and torque.

The table below gives a fairly good idea of the motorâs performance in terms of RPM, no load current as a function of voltage and stall torque, stall current as a function of voltage.

Features :

Cost-effectiveness of the injection-molding process.

Elimination of machining operations.

Low density: lightweight, low inertia.

Uniformity of parts.

Capability to absorb shock and vibration as a result of elastic compliance.

Ability to operate with minimum or no lubrication, due to inherent lubricity.

The relatively low coefficient of friction.

Corrosion-resistance; elimination of plating, or protective coatings.

The quietness of operation.

Tolerances often less critical than for metal gears, due in part to their greater resilience.

Consistency with the trend to greater use of plastic housings and other components.

Specification:

Operating Voltage(VDC)

3~12

Shaft Length (mm)

8.5

Shaft Diameter (mm)

(Double D-type) 5.5

No Load Current

40-180mA.

Rated Speed(After Reduction)

100 RPM

Rated Torque

1KgCm

Weight (gm)

30

Dimensions in mm (LxWxH)

42 x 23 x 55

Gearbox Shape

L-Shape

Dimensions :

Cost-effectiveness of the injection-molding process.

Elimination of machining operations.

Low density: lightweight, low inertia.

Uniformity of parts.

Capability to absorb shock and vibration as a result of elastic compliance.

Ability to operate with minimum or no lubrication, due to inherent lubricity.

The relatively low coefficient of friction.

Corrosion-resistance; elimination of plating, or protective coatings.

The quietness of operation.

Tolerances often less critical than for metal gears, due in part to their greater resilience.

Consistency with the trend to greater use of plastic housings and other components.

Specifications

Operating Voltage(VDC)
3~12
Shaft Length (mm)
8.5
Shaft Diameter (mm)
(Double D-type)
5.5
No Load Current
40-180mA.
Rated Speed(After Reduction)
100 RPM
Rated Torque
1KgCm
Weight (gm)
30
Dimensions in mm (LxWxH)
42 x 23 x 55
Gearbox Shape
L-Shape

More in DC & Geared Motors

You might also need

10 RPM Johnson Geared Motor High Torque Motor - ER008

10 RPM Johnson Geared Motor High Torque Motor - ER008

This johnson geared motor provides torque which falls intermediate to the torques by center shaft gear motors and side shaft dc gear motors, at a reasonable cost.It is a simple DC

₹480.00 GST added at checkout