10-Core Rainbow Flat Ribbon Cable 1 Metre - RS030

SKU RS030

10-core rainbow ribbon cable for project wiring RS030 is a 1 metre length of flat ribbon cable with ten parallel, colour-coded conductors.

₹58.50

18% GST added at checkout

In stock

₹150 flat shipping, free over ₹3000

  • Pay by UPI: GPay, PhonePe, Paytm & BHIM (no gateway fees)
  • GST invoice on every order
  • Payment confirmed by us before dispatch (no auto-charge)
  • Dispatched in 2–4 working days from Agra, Uttar Pradesh.

Buying for a school or in bulk? Ask us for institutional pricing. Get a quote

About this product

10-core rainbow ribbon cable for project wiring RS030 is a 1 metre length of flat ribbon cable with ten parallel, colour-coded conductors. The joined ribbon keeps several connections together while the different insulation colours help you trace each wire during assembly and troubleshooting. It is an unterminated cable, not a set of ready-made male or female jumper leads. What is included

One 1 metre length of 10-core ribbon cable.

Multicolour insulation for conductor identification.

Flat, joined cable format for organised routing.

Bare cable ends, without fitted connectors.

Product photographs show the cable's general construction and colour pattern. They are not a length measurement. A quantity of one is the 1 metre unit listed here; if you need a single uncut length across multiple units, confirm cutting and packing before ordering rather than assuming a continuous roll. Use it for a custom wiring harness The cable is useful for organising low-voltage connections between compatible project boards, controls, displays or sensors. Cut the required length after allowing space for bends and termination. Separate individual cores or smaller groups only as far as needed, taking care not to nick the insulation or conductor. For soldered connections, strip a short section carefully, make a sound joint and insulate any exposed conductor. Add strain relief so movement does not pull directly on a solder joint, header or board pad. Route the ribbon away from sharp metal edges, hot components and moving parts. It does not have a built-in shield. Check the connection, not just the colour A colour is an identification aid, not an assigned electrical function. Mark both ends against your circuit diagram and check each connection with a continuity tester before applying power. Check for shorts between adjacent conductors and confirm connector orientation where a separate connector is fitted. Bare cable ends do not plug directly into a breadboard or development-board header without a suitable termination. Match the cable and any connector to the voltage, current and signal requirements of your project. This listing does not specify a verified wire gauge, conductor pitch, metal composition or current rating. Do not assume compatibility with a particular IDC connector from the number of cores alone. This is not a recommendation for mains wiring, high-current motor power or high-speed data links. Package: 1 x 1 metre 10-core rainbow ribbon cable. Connectors, tools and boards are not included. SKU: RS030.

More in Connectors & Headers

You might also need

0.5mm Pitch 30 Pin FPC FFC SMT Flip Connector - RS3317

0.5mm Pitch 30 Pin FPC FFC SMT Flip Connector - RS3317

The 0.5mm Pitch 30 Pin FPC/FFC SMT Flip Connector is a compact, precision-designed surface-mount connector developed for reliable connections with Flexible Printed Circuits (FPC)

₹28.50 GST added at checkout